Debian Jessie with GPU driver, WiringOP, Wifi, Retroarch etc preinstalled

guiseco

Hi guys, could you help me ?

http://www.orangepi.org/orangepi ... &extra=page%3D1

I am trying to compile easycap stk1160 but build dir and source dir are pointing to nowhere !

orangepi@OrangePI:/lib/modules/3.4.39$ ls -l
total 352
lrwxrwxrwx 1 root root    49 Dec 17 13:56 build -> /home/LoBo2_Razno/OrangePI/kernel_3.4.9/linux-3.4
drwxr-xr-x 6 root root  4096 Nov 16 20:40 kernel
-rw-r--r-- 1 root root 91686 Nov 16 20:40 modules.alias
-rw-r--r-- 1 root root 97038 Nov 16 20:40 modules.alias.bin
-rw-r--r-- 1 root root 18362 Nov 16 20:40 modules.builtin
-rw-r--r-- 1 root root 19686 Nov 16 20:40 modules.builtin.bin
-rw-r--r-- 1 root root 13990 Nov 16 20:40 modules.dep
-rw-r--r-- 1 root root 20536 Nov 16 20:40 modules.dep.bin
-rw-r--r-- 1 root root    52 Nov 16 20:40 modules.devname
-rw-r--r-- 1 root root  5993 Nov 16 20:40 modules.order
-rw-r--r-- 1 root root    55 Nov 16 20:40 modules.softdep
-rw-r--r-- 1 root root 27180 Nov 16 20:40 modules.symbols
-rw-r--r-- 1 root root 33732 Nov 16 20:40 modules.symbols.bin
lrwxrwxrwx 1 root root    49 Dec 17 13:56 source -> /home/LoBo2_Razno/OrangePI/kernel_3.4.9/linux-3.4
orangepi@OrangePI:/lib/modules/3.4.39$

Vlad

Thanks.

Does ffmpeg/avcodec/libx264/libx265 utilize H3 GPU?  

melanrz

Vlad replied at 2016-4-17 10:47
Thanks.

Does ffmpeg/avcodec/libx264/libx265 utilize H3 GPU?

use vpu,no gpu

Vlad

melanrz replied at 2016-4-18 13:44
use vpu,no gpu

Thanks for reply.

default libx264|265 already uses cpu (4*Cortex-A7) only.

do you mean vpu is a video processor unit? so libx264|265 utilize H3's built in AVC encoder at this custom linix distribition?

dony71

using this image reboot command will shutdown device
i think some bug as stated below
https://github.com/igorpecovnik/lib/pull/174

anybody experience the same?

soroush_crazy

I have RTL8188CUS wifi
how to config wpa wifi connection?
I had changed my interface in /etc/network/interface to :


########################################
# interfaces(5) file used by ifup(8) and ifdown(8)
# Include files from /etc/network/interfaces.d:
source-directory /etc/network/interfaces.d

auto lo eth0
iface lo inet loopback
iface eth0 inet dhcp
auto wlan2
iface wlan2 inet dhcp
        wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
########################################



and my /etc/wpa_supplicant/wpa_supplicant.conf look like :


######################################
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1

network={
  ssid="Rahmani"
  psk="123456789xyz"
}
#####################################

but wifi would not connect to my router
any thing else to do for configing?
plearse Show me how to config wpa wifi connection.

kris85

Hi. Could somebody help me configure hostapd with wireless dongle ? I bought wireless dongle netis wf2116, it is 300 Mbps and it is base on realtek 8192cu chipset. I use this distro which is in topic, made by jacer. Card is recognized when plugged into usb port, drivers are loaded. I tried tutorial from rpi site : http://elinux.org/RPI-Wireless-Hotspot, I configured it as described, almost everything works good, netis card is getting ip address, but when I try to connect to AP with laptop or phone but can't obtain ip address. Maybe somebody has a method to run AP mode with this chipset ? Please help. Regards, Kris

kris85

Hi. Could somebody help me configure hostapd with wireless dongle ? I bought wireless dongle netis wf2116, it is 300 Mbps and it is base on realtek 8192cu chipset. I use this distro which is in topic, made by jacer. Card is recognized when plugged into usb port, drivers are loaded. I tried tutorial from rpi site : http://elinux.org/RPI-Wireless-Hotspot, I configured it as described, almost everything works good, netis card is getting ip address, but when I try to connect to AP with laptop or phone but can't obtain ip address. Maybe somebody has a method to run AP mode with this chipset ? Please help. Regards, Kris

gang208

Hello friends. having this problem, set an image downloaded from here https://yadi.sk/d/n3UtyjclmkbAj and sees HDD and USB-stick. what to do? iron Orangepi plus 2

simplyngo

IM unable to print from HP1112. Hplip is not detecting it.someone plz help me.it is urgent .