Openelec Build for OPI PC and 2 now with HW decoding

jernej

lymon replied at 2016-2-14 07:54
I know, but as it says in the "latest prebuilt images" topic that the images are with PVR addons in ...

Thanks, now I figured out what you mean. i removed few words.

What happens exactly when kodi freezes? Does it reboot? I tested with iptvsimple as I dont have real dvb dongle. Can you enable.debug logging and then send appropriate log file?

Testing is also something which also helps RPi use OpenMAX, I think, for playback and that doesn't rule out ALSA, but I didn't check that thorougly.

ParadoxX27

Has anyone tried to fix the power button to operate the sleep mode ?

jernej

I will implement in following days, however, don't expect this to work with IR remote yet. I must extend the new driver.

starsail0r

The dvi solution didn't work for me. I can't tell if it is my dvi-d adapter and monitor or the dvi solution is the problem.

Can anyone else pull the latest version of openelec from jernej's repository and kindly report here if hdmi to dvi adapter works?

nightflasher

starsail0r replied at 2016-2-14 20:17
The dvi solution didn't work for me. I can't tell if it is my dvi-d adapter and monitor or the dvi s ...

i can't get this to work too. don't what to do, no video-mode works except for the safe-mode 640x480...

@GUTEK@

jernej
There is a bug in the patch to lcdproc:
Address BL is 0x80 (i2c_line_BL=0x80) should be 0x08 (i2c_line_BL=0x08).

...
+i2c_line_RS=0x01
+i2c_line_RW=0x02
+i2c_line_EN=0x04
+i2c_line_BL=0x80
+i2c_line_D4=0x10
+i2c_line_D5=0x20
+i2c_line_D6=0x40
+i2c_line_D7=0x80
...

jernej

@GUTEK@ replied at 2016-2-14 19:43
jernej
There is a bug in the patch to lcdproc:
Address BL is 0x80 (i2c_line_BL=0x80) should be 0x08  ...

Not really. Intention of this patch is to provide configuration support for hd44780 driver. So if some default setting is not ok for you, you can create configuration file to change that.

Unoqueva

jernej
I've been testing a distribution made by ua3nbwwhere the bus i2s works, I've been using and it works perfectly.
Can you add i2s drivers to OpenELEC?

@GUTEK@

jernej replied at 2016-2-15 02:52
Not really. Intention of this patch is to provide configuration support for hd44780 driver. So if  ...

But probably should not have two lines (BL and D7) of the same address?

jernej

@GUTEK@ replied at 2016-2-14 20:21
But probably should not have two lines (BL and D7) of the same address?

It's only in comments and even there is represented as an example of alternative wiring. Do you have different experience?