Orange PI PC raspbian support

kris85 · Published in 2015-10-5 13:45:06

Hi. I have a question. Does orange pi pc support raspbian ? I haven't found image of raspbian for dowload here http://www.orangepi.org/downloadresources/ in orange pi pc section. Maybe i can download it but from other version section. Should it work with orange pi pc ? Maybe it works but it isn't in orange pi pc section ? But if other raspbian images are not compatible with OPi PC - when You are going to add support for it ?

patrickwayne · Published in 2015-10-7 15:06:05

raspbian Orange Pi2 works, try it.
you can load the new kernel pack

but the keyboard special keys are different.

kris85 · Published in 2015-10-8 00:18:01

Yes it works, but i have another problem. Only one USB port works. Does someone have a solution for that ?

Sergei · Published in 2015-10-10 17:57:22

kris85 replied at 2015-10-8 00:18
Yes it works, but i have another problem. Only one USB port works. Does someone have a solution for ...

I have the same problem with Orange Pi PC on image Raspbian_For_OrangePi2_mini2_v0_8_0 !
It works only one lower USB slot

Sergei · Published in 2015-10-10 19:39:27

Edited by Sergei at 2015-10-10 19:41

On Debian the same problem resolved so - http://www.orangepi.org/orangepi ... =480&page=1#pid4344
I checked it on my Orange PI PC , all three ports work

Thanks to youMy Orange PI PC was working.
USB 3Ports.I tried download script_kernel.tar.gz read this url.
http://www.orangepi.org/orangepi ... =viewthread&tid=342
and unzip script_kernel.tar.gz
Rename these files
script.bin.OPI-PC_1080p60 to script.bin
uImage_OPI-2 to uImage
copy them to the boot partion of my sdcard

epoch · Published in 2015-10-14 06:38:17

Did you were able to use all usb ports using raspbian with that method?, or now you are using Debian?

lucami · Published in 2015-10-14 18:15:59

Could you please tell me which exacly image you use?
I tried with raspbian for orange pi 2 mini, and this image dont work for me ;/

kris85 · Published in 2015-10-14 20:10:26

Edited by kris85 at 2015-10-14 20:11

You must know that raspbian image is different from debian for example Jessie image. In debian we must replace both files uimage and script.bin. At now, I don't remember - in raspbian image is only one file - uimage or script.bin ( as I said, I don't remember at now, I don't have access to images now), so I think, this method will work on images where originally are both files.

Sergei · Published in 2015-10-14 21:19:08

Edited by Sergei at 2015-10-14 21:23

epoch replied at 2015-10-14 06:38
Did you were able to use all usb ports using raspbian with that method?, or now you are using Debian ...

Yes, unfortunately, this fact forced me to use Debian (wheezy)

fritz · Published in 2015-10-14 23:54:02

You need to replace u-boot too
RESUME:
1. rewrite u-boot
2. replace uImage
3. write script.bin
4. replace kernel-modules (/lib/modules/.....)
should work