|
root@OrangePi:~# cat /etc/wvdial.conf
[Dialer defaults]
Modem = /dev/modem0
Baud = 30720000
Dial Command = ATDT
Init1 = ATE1
Init2 = AT + CGDCONT = 1, "IP", "wap.tracfone", "", 0,0
FlowControl = CRTSCTS
Init3 = ATM0
Phone = * 99 #
Username = orange
Password = orange
Stupid Mode = 1
root@OrangePi:~#
- root@OrangePi:~# wvdial
- --> WvDial: Internet dialer version 1.61
- --> Cannot get information for serial port.
- --> Initializing modem.
- --> Sending: ATE1
- ATE1
- OK
- --> Sending: AT + CGDCONT = 1, "IP", "wap.tracfone", "", 0,0
- AT + CGDCONT = 1, "IP", "wap.tracfone", "", 0,0
- +CME ERROR:58
- --> Bad init string.
- --> Cannot get information for serial port.
- --> Initializing modem.
- --> Sending: ATE1
- ATE1
- OK
- --> Sending: AT + CGDCONT = 1, "IP", "wap.tracfone", "", 0,0
- AT + CGDCONT = 1, "IP", "wap.tracfone", "", 0,0
- +CME ERROR:58
- --> Bad init string.
- --> Cannot get information for serial port.
- --> Initializing modem.
- --> Sending: ATE1
- ATE1
- OK
- --> Sending: AT + CGDCONT = 1, "IP", "wap.tracfone", "", 0,0
- AT + CGDCONT = 1, "IP", "wap.tracfone", "", 0,0
- +CME ERROR:58
- --> Bad init string.
Copy code
Not sure whats up. I am trying to use Straight Talk in US/NC on GSM/Tmobile |
|