Power Supply for Pi PC 2

stoop · Published in 2016-12-1 03:05:10

I have tried 2 different adapters both with barrel sizes too big to fit in the socker for DC power on the Pi PC 2.

Can anyone point me to a link on Amazon or somewhere for a power supply that is rated correctly for the Pi PC 2 and has the correct sized jack?

Thanks.

ImmortanJoe · Published in 2016-12-4 05:41:40

The Playstation Portable (PSP) uses the right size barrel connector too.
I made my own cable from a broken 3rd party PSP charger and a broken MicroUSB cable. No sane person would do it this way, but I took the USB A connector from the broken MicroUSB connector and attached it to the cable for he broken charger.

I have this cable plugged into a modified switched USB hub which is powered by a 5A 5V LED lightstrip power supply.

alexbudd · Published in 2016-12-1 13:31:11

You can try something like the below:

https://www.amazon.com/Coming-Da ... =5+volt+2+amp+2.1mm

https://www.amazon.com/BINZET-Ad ... =5+volt+2+amp+2.1mm

The power supply needs a 2.1mm connector

Tina · Published in 2016-12-5 14:08:38

You will need a power supply which does deliver a stable 5V voltage. Most power supplies for mobile phones do not deliver that.

To be 100% sure you could use those:

http://www.aliexpress.com/store/ ... 71_32248555041.html
http://www.aliexpress.com/store/ ... 71_32281484383.html

or you can use a lab power supply adjusted to 5V to power the 5V rail direct at GPIO pins 2/4 (+5V) and 6 (Ground).

Power Supply for Pi PC 2

Viewed section