please choosego to mobile | Continue to access the PC version
Author: BryanFRitt

Directions for Heat Sink?

[Copy link]
Published in 2015-7-21 17:22:20 | Show all floors
matteobp replied at 2015-7-21 16:27
Thanks for the good explanation. I have a Orange Pi Plus (H3 based), and it is ok for me to read t ...

Well, the H3 isn't supported by mainline kernel/U-Boot and not even all informations seem to be available: http://linux-sunxi.org/H3
So you're dependent on the (non existing) software support your hardware vendor provides :-)


When you look at this thread CPU3 killed off for thermal budget then you get strings to search for. Download the SDK from the first link above and grep through it.

Two thermal values seem to be exported via sysfs (but who knows what is what? Seems noone has a clue)

Maybe one is the thermal sensor from the SoC and the other the PMU's? Since noone provides highres images for the boards I have no idea where the PMIC/PMU might be (most likely the small chip next to the power connector): http://sunxi.org/Xunlong_Orange_Pi_Plus


A simple test is to use a non-conductive glove, monitor the temperatur in a loop and touch SoC and afterwards PMU and see how values 'react' (touching a chip with your finger will always lead to immediate heat dissipation between both surfaces)
  1. while true ; do
  2.     cat /sys/class/thermal/thermal_zone0/temp
  3.     cat /sys/class/thermal/thermal_zone1/temp
  4.     sleep 1
  5. done
Copy code


2

threads

53

posts

1720

credits

Gold member

Rank: 6Rank: 6

credits
1720
Published in 2015-7-21 17:37:14 | Show all floors
Thanks very much for the information.
I am increasingly convinced that I wasted my money buying the Orange Pi Plus.
Published in 2015-7-21 18:12:59 | Show all floors
matteobp replied at 2015-7-21 17:37
I am increasingly convinced that I wasted my money buying the Orange Pi Plus.

Why not donating it to the linux-sunxi community like https://groups.google.com/forum/#!topic/linux-sunxi/sMMqCjUfoLE

I think it depends on the use case for the board in question. In case you want to replace a NAS (IIRC this was your plan?) a SoC without SATA is clearly the wrong choice. But tricky marketing (advertising the board as SATA capable since 'there is a SATA connector on the board') does its job. People think 'hey it's cheap, has SATA and has twice as much CPU cores than A20 based boards. It must be faster' (which is a spectacular false assumption as anyone can easily realize when you look at older Marvell SoCs used in NAS boxes: for example the 88F6281 which features a single-core ARMv5TE CPU @ 1-1.2GHz, but 2 good Gbit NICs and 2 SATA ports: Any device which this SoC easily outperforms an Orange Pi Plus with its quad core CPU and slow USB-to-SATA-bridge when it' about NAS useage).

Maybe this is the reason why vendors like Xunlong or eg. SinoVoip don't support the linux-sunxi community by donating a few new devices for which mainline support is missing. The linux-sunxi community will do the work if anybody's interested in the hardware. But this will take some time. And in the meantime the hardware vendor already tries to sell the next version of their boards featuring an octa-core SoC since customers are always dumb enough to believe 'the more cores, the better' (who understands SMP challenges? Who understand cache coherency and the like? Who understands I/O latency and so on?)
Published in 2015-7-21 18:15:55 | Show all floors

17

threads

212

posts

1414

credits

Gold member

Rank: 6Rank: 6

credits
1414
Published in 2015-7-21 23:02:18 | Show all floors
The PMU chip is cold on my board, I can touch it even if the app says 51°C. But the SoC is very hotter !
BTW, I'm using Android and the app "Cpu Temp"
It's about 30°C in the room, so 20°C difference is not surprising

18

threads

200

posts

888

credits

Moderator

Rank: 7Rank: 7Rank: 7

credits
888
Published in 2015-8-11 15:44:00 | Show all floors
Edited by magicse at 2015-8-11 10:07

The best dimension size of heat sink for OPi2 35x30mm. After long search was found next variant 35x25.
Orange PI 2
www.orangepi.pp.ua

0

threads

6

posts

210

credits

Intermediate member

Rank: 3Rank: 3

credits
210
Published in 2015-8-11 17:58:08 | Show all floors
I found this...
http://www.aliexpress.com/item/F ... For/1472143066.html
(from AliExpress Android)

18

threads

200

posts

888

credits

Moderator

Rank: 7Rank: 7Rank: 7

credits
888
Published in 2015-8-12 01:49:01 | Show all floors
I think 14mm is so high, isn't it?
Orange PI 2
www.orangepi.pp.ua

18

threads

200

posts

888

credits

Moderator

Rank: 7Rank: 7Rank: 7

credits
888
Published in 2015-8-13 06:04:14 | Show all floors
Edited by magicse at 2015-8-13 00:34

My experiments with heat thinks ))
1  Copper Heat Sink from Raspberry Pi. Size Dimensions 14x12x5.5mm (very small and not cover SOC) US $0.88 x 1 piece

2 A better option Pure Aluminum heatsink from Raspberry Pi Ver. 2.0 One:14 x 14 x 6 mm and another  two:9 x 9 x 4 mm (but it too small) US $0.98 x 1 Lot

The best  option 25x35x10mm LED Power Cooler Aluminium Heat-sink US $0.49 x 1 piece







Orange PI 2
www.orangepi.pp.ua

0

threads

72

posts

3734

credits

Forum patriarch

Rank: 8Rank: 8

credits
3734
Published in 2015-8-13 06:25:29 | Show all floors
doubleatheman replied at 2015-8-11 15:19
I got this, It may not fully cover the cpu, but I think it will be better than not having a heat sin ...

I believe the bigger one is the exact size of the H3. And the price is very nice I got a 5 pieces set from eBay with heatsinks that were 14x14x10, but I am hundreds of miles away from home again and I do not have the link here. The whole set cost between $1 and $2. I got a couple other sets too, but they were all still on the mail when I left, so I can't comment on any. Some people say the only true solution is to add a cooler too, and perhaps they are right, but the heatsink alone should at least lessen the problem. That is what I am counting on anyway Please leave your impressions after adding the heatsink.

OPi 2. OPi-PC, OPi+2E, OPi-PC2
You need to log in before you can reply login | Register

Points Rule

Quick reply Top Return list