Linux Distributions for Orange PI H3 boards

caracolo · Published in 2016-12-1 20:28:51

Edited by caracolo at 2016-12-1 20:36

helloo, what about wifi dondle RTL 8191SU , lsusb reconize it but does not install the firmware, and dont see 'wlan1' anywhere, I cant see drivers anywhre , i dont know how install thems
I hace a belkin f6d4050 USB WIFI wifi too, lsusb appears , the wlan! appears too , but show a message tha firmware is missing . I use Ubuntu mate vivid 15

Thanks

Mikail · Published in 2016-12-10 15:47:03

Ethernet not working (not even lights flickering) on Debian Jessie.
I'm doubting if i'm using the right script.bin & uImage.
I used the OPI-PLUS while using an Orange Pi Plus 2.

I really need a fix for this, I'm building a NAS, but i'm certainly not going to connect it on Wi-Fi!

ecolyx · Published in 2016-12-12 13:04:47

How do these images manage the voltage regulator on the Opi One?

Thanks for all your efforts :-)

B_Royeau · Published in 2016-12-22 20:02:50

Hi there !

I'm working on OPI Plus 2 for a little project

I did not succeed compiling my own kernel, due to my no poweful computer, in order to integrate alsa Loopback and Dummy module. I would like to integrate it in an OPI Plus 2. Is it possible forsomeone to help me ?

Thank you !

admin · Published in 2016-12-24 10:26:06

sampath92 replied at 2016-9-9 17:57
Hi Loboris ,
Sorry for the trouble. I had install OrangePI-PC_Ubuntu_Vivid_Mate.img in mu new pc plu ...

Hi friend,OrangePI-PC_Ubuntu_Vivid_Mate.img cannot use for pc plus. You should use image of pc plus corresponding.

admin · Published in 2016-12-24 10:27:04

Mikail replied at 2016-12-10 15:47
Ethernet not working (not even lights flickering) on Debian Jessie.
I'm doubting if i'm using the ri ...

Hi friend, have you check the image you burn and power supply you use?

admin · Published in 2016-12-24 10:28:03

B_Royeau replied at 2016-12-22 20:02
Hi there !

I'm working on OPI Plus 2 for a little project

Hi friend, if you follow all steps refer to the newest manual, i think it should work.

B_Royeau · Published in 2016-12-27 16:45:45

admin replied at 2016-12-24 10:28
Hi friend, if you follow all steps refer to the newest manual, i think it should work.

Can you give me the link ?

amir_zohaib · Published in 2017-1-3 05:31:02

Arnulf replied at 2016-3-28 14:35
You need to use correct script.bin file for your screen. For example I am using FullHD plasma TV za ...

Issue was LOW VOLTAGE
even if you use rated 5v adapters, they are sometimes 4.8 or something and the fckling pie is very sensitive to low voltage, i used a 12v adapter with buck converter set to 5.08 volts, works perfectly!

just display is zoomed a bit, trying to solve it.

coscos · Published in 2017-1-14 00:12:43

Hello, I get my orange pi board. Unfortunately after spending days in the forum, setting up several linux host systems. I understand that I should ask some simple questions to get started.

1- The getting started links that everybody talks about are dead most of the time.
2- The method explained at http://www.orangepi.org/Docs/Building.html#Get_a_cross_toolchain does not work for my system, Ubuntu 16.04. make returns error:
fatal error: linux/compiler-gcc5.h: No such file or directory.
If it is about kernel version etc. Can somebody direct me to a preferred version of ubuntu? Or a workaround?
3- If it is recommended to use linaro toolchain, is there a step by step guide to, install the toolchain, get the necessary packages and build a simple hello world app.
4- I work with several boards(gumtix, beagleboard etc) before and never feel helpless before.

I search the forum, many similar questions asked but most the answers refer to the previous posts, which are also referring dead links.

Thanks for your time.