Openelec Build for OPI PC and 2 now with HW decoding

roblad · Published in 2016-6-4 02:24:38

DIMA DIMA DIMA !!!

llonca1 · Published in 2016-6-4 02:37:47

Edited by llonca1 at 2016-6-4 02:42

@jernej the new build is awesome

on my opione the temps went from 80idle to 55idle...60 degrees playin 1080p x264 from nas..awesomeee

Thanks!

Hvala

giaur500 · Published in 2016-6-4 02:56:02

Jernej, can you also look at video brightness/contrast sliders? They don't work. Maybe it can be also fixed by new renderer?

jernej · Published in 2016-6-5 02:09:52

Edited by jernej at 2016-6-4 19:29

giaur500 replied at 2016-6-3 19:56
Jernej, can you also look at video brightness/contrast sliders? They don't work. Maybe it can be als ...

Brightness, constrast, saturation settings are not exposed in video driver, but they are present inside it. Currently they are set to 50/50/50 (percent?). Maybe someone else could make driver extension?

EDIT: You are right, that would fit in new render concept, however, I'm a bit stuck with it. I don't know enough about Kodi internals yet to make it work without crashing.

giaur500 · Published in 2016-6-5 03:29:35

Ok. It's not so important for now. More important is vsync.

melanrz · Published in 2016-6-6 01:12:28

hi guys,with last builds i cant change resolution,on all boards opi2,opi pc,opi lite,in menu make distorted image,with same scrip.bin only modification on display para (original script.bin from build) dont boot.

melanrz · Published in 2016-6-6 01:20:28

now working but,dont boot with something in usb port,without boot and after solve this problem.

jernej · Published in 2016-6-6 01:23:55

This bug is present for a long time. Issue is in mali framebuffer driver. It doesn't detect new resolution. I will implement workaround soon, so the driver will be completely closed and opened again at every resolution change.

The trouble here is that Kodi seems to remember last resolution and sets it at every boot. Workaround for that is that you change resolution in script.bin and then boot without HDMI cable attached. After you are sure that Kodi is fully started, you can reconnect HDMI.

P.S.: Images for all boards are the same. They differ only in script.bin and U-Boot configuration.

jernej · Published in 2016-6-6 01:27:03

melanrz replied at 2016-6-5 18:20
now working but,dont boot with something in usb port,without boot and after solve this problem.

Which board? Can you attach serial console and provide the output from the failed boot? I tried this many times with my OPi2 and it never failed.

Xer0 · Published in 2016-6-6 20:30:02

jernej, could you share the settings used for compiling media_build?