GPIO library - WiringPi

StaLeWaR29

@WereCatf

Thanks for the quick response!
I updated the library just as you advised. He stopped to consider at all.


P.S > I'm sorry, I now have a problem with the connection

StaLeWaR29

I double-checked everything, does not work.
Do not believe all

WereCatf

StaLeWaR29 replied at 2016-3-14 17:36
I double-checked everything, does not work.
Do not believe all

I reverted the commit, there must be something else that's wrong with your setup -- it should work as-is. Are you sure you don't have e.g. some other app trying to access the same pin or something similar?

StaLeWaR29

yes, I am sure
I commented out your latest code changes.
And it came back. Considers again.

May be used execl not the best solution?
exeсl in a process executes an executable file, and then terminates the process.
My experience is small, maybe I confuse

volkancc

WereCatf replied at 2016-2-17 09:26
I got fed up and took a look at this stuff. I fixed WiringOP to support interrupts and at least in m ...

i try to install armbian latest source and clone package and compile all is ok

but i want to test your code ISR mean
give error

gpio: Unable to open GPIO direction interface for pin 15: No such file or directory
wiringPiISR: unable to open /sys/class/gpio/gpio15/value: No such file or directory        

lsmod result is :

Module                  Size  Used by
8189es                896688  0         



I use Armbian latest

apocalyps

volkancc replied at 2016-3-16 00:59
i try to install armbian latest source and clone package and compile all is ok

but i want to test ...

Make sure you have gpio sysfs compiled in your kernel so see if the directory excists. Also try gpio readall and be sure you have the right pin.

1. root@orangepipc:/sys/class/gpio/gpio199# find
   
2. .
   
3. ./edge
   
4. ./power
   
5. ./power/control
   
6. ./power/async
   
7. ./power/runtime_enabled
   
8. ./power/runtime_active_kids
   
9. ./power/runtime_active_time
   
10. ./power/autosuspend_delay_ms
    
11. ./power/runtime_status
    
12. ./power/runtime_usage
    
13. ./power/runtime_suspended_time
    
14. ./value
    
15. ./active_low
    
16. ./device
    
17. ./subsystem
    
18. ./uevent
    
19. ./direction
    

Copy code

volkancc

i think my kernel is not rigth but i use armbian how can i recompile my kernel

my ls result is :
root@orangepione:~# ls /sys/class/gpio/
export  gpiochip0  unexport         

WereCatf

volkancc replied at 2016-3-16 00:59
i try to install armbian latest source and clone package and compile all is ok

but i want to test ...

I do not know what you're doing wrong, but it shouldn't be trying to export gpio15. WiringOP-pin 15 is gpio198, not gpio15. You have messed something up.

volkancc

my board is orange pi one

volkancc

WereCatf replied at 2016-3-16 03:10
I do not know what you're doing wrong, but it shouldn't be trying to export gpio15. WiringOP-pin 1 ...

can you share os image with us ? i wanna test with ur kernel