WiringOP for orange pi pc plus (Android)

flyingbaloon · Published in 2017-4-23 01:44:09

I am trying to get the wiringOP to work on the pc plus board running Android , I have downloaded https://github.com/zhaolei/WiringOP and followed the instructions given there, but when I run the command 'gpio readall' nothing happens . Can anyone help me out, Is it not supposed to work with android?

pmpp · Published in 2017-5-10 04:10:22

Edited by pmpp at 2017-5-10 04:29

hi @flyingbaloon , you need root (uid=0) access to make WiringPI-OP works because it access /dev/mem
WiringOP's gpio command works fine on Orange PI PC , I have tested it on H3Droid 1.2.3+ ( which allows terminal root access and gcc 4.9.2 static builds ), while I2C works fine only so far on opipc Lite.

flyingbaloon · Published in 2017-6-20 12:56:40

pmpp replied at 2017-5-10 04:10
hi @flyingbaloon , you need root (uid=0) access to make WiringPI-OP works because it ac ...

Hi @pmpp can you please tell me how you have managed to get root access , using h3droid , I am unable to run kingoroot in orange pi pc plus with h3droid .

pmpp · Published in 2017-6-20 14:00:51

Edited by pmpp at 2017-6-20 18:31

@flyingbaloon h3droid has permanent full root access on UART debug port ( three wires and a $.50 debug uart ttl adapter ) you' ll have password less /system/bin/sh as root there even before the system is up. This is enough for most of situations ...

The screen shown above is the terminal choosen for my future SDK (called "u-root") connected to H3Droid ssh root daemon that use the same priv/pub key used in official installer. It offers bash, gcc 6.3, python 3.6.1 + wiriing pi python. It also offer *non root gpio/serial/pwm/i2c/serialports via a specialized su daemon* via json rpc or hessian rpc for standard user applications.

flyingbaloon · Published in 2017-6-20 18:00:05

pmpp replied at 2017-6-20 14:00
@flyingbaloon h3droid has permanent full root access on UART debug port ( three wires and a $.50 de ...

thanks

robi217 · Published in 2017-6-20 23:50:28

flyingbaloon replied at 2017-6-20 18:00
thanks

If you want to get root access only in the terminal/shell (in H3Droid), you can also use SSH for it (Linux has got a built-in SSH client, on Windows you can use PuTTY software for that). But in this case you have to include your public SSH key file during the installation process of H3Droid (when it asks for your key file), because if you skip through it, you won't be able to reach the system shell via SSH.

flyingbaloon · Published in 2017-6-21 22:15:41

@robi217 will try this aproach too , thanks

WiringOP for orange pi pc plus (Android)

This thread contains more resources