AlWinner (Orange SoC) is branched in to Libreelec

harrym · Published in 2017-10-22 16:03:56

https://libreelec.tv/2017/10/allwinner-amlogic-rockchip/

Hopelly, Orange Pi ONE will be fully supported soon.

giaur500 · Published in 2017-11-9 17:27:13

This means nothing. There is nothing usable available. You can wait 2 yers, then check again, and hey, you will see there is still nothing usable available. This is pointless, sell your OPI andy better buy RaspberryPI

deltaray · Published in 2017-11-30 23:03:35

This is actually good!
This means something is happening on top level and it looks likesome official LibreElec devs are working on it

thc013 · Published in 2017-12-2 19:33:52

giaur500 replied at 2017-11-9 17:27
This means nothing. There is nothing usable available. You can wait 2 yers, then check again, and he ...

Think you didn't look well

if you check the different git repos you see that it is almost finished .

only what is not on the openelec repo is the hw codec .

but if you look a bit futher on other repos you see the hw support coming , a20 support is on the sunxi mailing list and in other git repos you see some h3 support coming.

and if you look around you can see that alwinner is making better contact with the sunxi community . like yesterday they released the H3 kernel 4.4 BSP

deltaray · Published in 2017-12-3 02:27:36

I tried to compile the Allwinner Branch myself yesterday and to my surprise it did fully build without Errors and i got an flashable Image. I tried it on Orange pi one, but it didn't boot up. Hopefully it will work when they are finished

thc013 · Published in 2017-12-3 04:58:41

Edited by thc013 at 2017-12-3 09:34

deltaray replied at 2017-12-3 02:27
I tried to compile the Allwinner Branch myself yesterday and to my surprise it did fully build witho ...

in

/projects/Allwinner/options

change

UBOOT_CONFIG="orangepi_pc_defconfig"

to

UBOOT_CONFIG="orangepi_one_defconfig"

and

KERNEL_UBOOT_EXTRA_TARGET="sun8i-h3-orangepi-one.dtb"

to

KERNEL_UBOOT_EXTRA_TARGET="sun8i-h3-orangepi-one.dtb"

and in

/projects/Allwinner/bootloader/boot.cfg

load mmc 0:1 0x43000000 sun8i-h3-orangepi-pc.dtb

to

load mmc 0:1 0x43000000 sun8i-h3-orangepi-one.dtb

and remove in the build folder and also in the .stamps folder

uboot linux and dtc

and recompile

igorpec · Published in 2017-12-3 20:27:52

Those Openelec images work nice:
http://down.nu/images/2016-10-26

Not the latest KODI, but good enough.

deltaray · Published in 2017-12-5 16:48:58

OpenElec images are to old. I have build some LibreElec images myself based on Shaggy013's Opi_HW_7 Branch (https://github.com/alorbach/LibreELEC.tv/tree/Opi_HW_7_delta) which is running pretty fine and has far more working plugins than OpenElec. Feel free to use them from here: http://libreelec.1337-server.net/

However I would love to get latest LibreElect and Kodi working on Orange PI
.

Thanks @thc013, I am going to build and try this on my Orange PI One.

giaur500 · Published in 2017-12-30 02:43:28

Kodi 17? Hardware video decoding?

Augusto · Published in 2018-5-1 00:23:41

igorpec replied at 2017-12-3 20:27
Those Openelec images work nice:
http://down.nu/images/2016-10-26

Do you know a image for orange pi win? Thanks