Author: loboris

Linux Distributions for Orange PI H3 boards

  [Copy link]

3

threads

96

posts

539

credits

Senior member

Rank: 4

credits
539
Published in 2015-10-24 05:08:41 | Show all floors
Edited by Survive-Pi at 2015-10-23 15:42

I have internet. Time updated. Spent 3 1/2 minutes downloading...
Sudo nmcli -a d WiFi connect
Enter ssid
Enter pswrd
Responded now connected...tried both alphabet desktops...xfce and the other one. Same result. Tried with a differnt image without wifi, I know what that looks like just zips through install,no time at all.

Thanks for the help...
Orange Pi Plus

3

threads

96

posts

539

credits

Senior member

Rank: 4

credits
539
Published in 2015-10-24 05:47:55 | Show all floors
AndrewStone replied at 2015-10-23 13:45
@Survive-PI  make sure you have internet connectivity.

Post the result of "ifconfig"

Oops, forgot ifconfig...will go back for it.ping google starts ok, I think, then dies, I think...




This thread contains more resources

You need to Log in to download or view,No account?    Register

x
Orange Pi Plus

3

threads

96

posts

539

credits

Senior member

Rank: 4

credits
539
Published in 2015-10-24 06:14:36 | Show all floors
AndrewStone replied at 2015-10-23 13:45
@Survive-PI  make sure you have internet connectivity.

Post the result of "ifconfig"

ifconfig...

This thread contains more resources

You need to Log in to download or view,No account?    Register

x
Orange Pi Plus

3

threads

96

posts

539

credits

Senior member

Rank: 4

credits
539
Published in 2015-10-24 06:17:58 | Show all floors
No emmc...

This thread contains more resources

You need to Log in to download or view,No account?    Register

x
Orange Pi Plus
Reply

Use magic report

3

threads

96

posts

539

credits

Senior member

Rank: 4

credits
539
Published in 2015-10-24 07:00:13 | Show all floors
Edited by Survive-Pi at 2015-10-23 16:05

Down to one sd card now. Of 3 I had, only 2 worked with orange pi. one of them locked up the other day.
Any way to forcibly reformat? Windows unable to format, SDFormatter unable to format. Both think it is locked... Tried format button on my camera...no luck. Trash?Could it be same problem with emmc?
Switching back to openSuse for now.
Orange Pi Plus

0

threads

25

posts

151

credits

Registered member

Rank: 2

credits
151
Published in 2015-10-24 07:00:54 | Show all floors
none of these four wifi dongles work for me. Running openSUSE, OPI-PC; what am I doing wrong? Help please. (they all work on RaspberryPI2)
nohostname:/home/orangepi # lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 005: ID 04d9:1702 Holtek Semiconductor, Inc. Keyboard LKS02
Bus 002 Device 004: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter
Bus 002 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 002 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
nohostname:/home/orangepi # sudo nmcli -a d wifi connect
SSID or BSSID: vodafone4F27
Error: No Wi-Fi device found.
nohostname:/home/orangepi # lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 005: ID 04d9:1702 Holtek Semiconductor, Inc. Keyboard LKS02
Bus 002 Device 006: ID 148f:7601 Ralink Technology, Corp. MT7601U Wireless Adapter
Bus 002 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 002 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
nohostname:/home/orangepi # sudo nmcli -a d wifi connect
SSID or BSSID: vodafone4F27
Error: No Wi-Fi device found.
nohostname:/home/orangepi # lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 005: ID 04d9:1702 Holtek Semiconductor, Inc. Keyboard LKS02
Bus 002 Device 007: ID 0bda:8172 Realtek Semiconductor Corp. RTL8191SU 802.11n WLAN Adapter
Bus 002 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 002 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
nohostname:/home/orangepi # sudo nmcli -a d wifi connect
SSID or BSSID: vodafone4F27
Error: No Wi-Fi device found.
nohostname:/home/orangepi # lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 005: ID 04d9:1702 Holtek Semiconductor, Inc. Keyboard LKS02
Bus 002 Device 008: ID 148f:7601 Ralink Technology, Corp. MT7601U Wireless Adapter
Bus 002 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 002 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
nohostname:/home/orangepi # sudo nmcli -a d wifi connect
SSID or BSSID: vodafone4F27
Error: No Wi-Fi device found.
nohostname:/home/orangepi #

0

threads

4

posts

28

credits

Novice

Rank: 1

credits
28
Published in 2015-10-24 10:22:44 | Show all floors
Edited by stone at 2015-10-24 10:25

@survive-pi:  You need to solve the intermittent ping failure issue.  You are going to get halfway thru installing the GUI, your internet is going to die, and the install will fail halfway thru.   Maybe move closer to your wifi router or somehow point the antenna vertically.  Or it could be that the wifi is unstable (I've been using wire).  

We've got to get you away from photographs of the screen too.  Do you have a laptop running windows?  If so download putty here: http://www.chiark.greenend.org.uk/~sgtatham/putty/.  Then you should be able to run it and connect to your orangepi by typing in its IP address, which you saw when you did an ifconfig (192.168.1.108).  But note that that address might change when you reboot the orangepi.  Also if ping is not stable you'll lose connectivity.

Also, this probably isn't your EMMC issue but don't use btrfs its unstable.

What is your screen resolution and SD card size?  I can give you a ubuntu 14.04 image that installs to my emmc if you want to try it.


2

threads

34

posts

449

credits

Intermediate member

Rank: 3Rank: 3

credits
449
Published in 2015-10-24 11:07:33 | Show all floors
Edited by toxuin at 2015-10-23 23:40

Hello!

I am trying to make a USB webcam work on my Orange PI PC with no luck.

It is a standard UVC webcam, known to work on my desktop linux machine with UVC driver and mjpg_streamer.
Thing is – even if I do "insmod uvcvideo" I cannot see the webcam as /dev/video0. So no software can interact with it.
Am I missing something?..Here is lsusb output:
  1. orangepi@OrangePI:/dev$ lsusb
  2. Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  3. Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  4. Bus 006 Device 004: ID 046d:08d7 Logitech, Inc. QuickCam Communicate STX
Copy code

Here is lsmod output:
  1. orangepi@OrangePI:/var/log$ lsmod
  2. Module                  Size  Used by
  3. snd_usb_audio          79205  0
  4. snd_usbmidi_lib        17391  1 snd_usb_audio
  5. snd_hwdep               5337  1 snd_usb_audio
  6. uvcvideo               59634  0
  7. 8189es                887631  0
Copy code

3

threads

96

posts

539

credits

Senior member

Rank: 4

credits
539
Published in 2015-10-24 11:23:05 | Show all floors
Edited by Survive-Pi at 2015-10-23 20:27

@stone
Ya, only got putty to connect once. Never connects when I'm trying something that doesn't work... sorry about that...beat the hell out of typing!
I've tried w/without btrfs
Screen works hdmi anything 480 to 1080. 480 is only one that doesn't overscan. I Usually use 720 so colors don't blind me and things show around edges. With 1080 task bars totaly disapear.
Using 32G card. 8G is the one that failed couple days ago.
I had older loboris image on emmc. It is gone now with the failed attempts with newer images. I will go back and try it if I can figure out which one it was just to make sure my emmc is ok.
Now I can't get fs_resize with openSuse either. Wifi works ...
****************************************
WARNING: TO RESIZE FILESYSTEM RUN:
sudo fs_resize
to remove this message run:
sudo rm /usr/local/bin/fs_resize_warning
****************************************
orangepi@nohostname:~> cd /usr/local/bin
orangepi@nohostname:/usr/local/bin> ls -a
.          fs_resize_warning     install_to_emmc    install_x2goserver
..         install_lxde_desktop  install_to_sdcard  install_xfce_desktop
fs_resize  install_mate_desktop  install_to_usb
orangepi@nohostname:/usr/local/bin> sudo fs_resize
root's password:
sudo: fs_resize: command not found
orangepi@nohostname:/usr/local/bin>

Sent from Orange Pi Plus
p.s. THANKS
Orange Pi Plus

2

threads

34

posts

449

credits

Intermediate member

Rank: 3Rank: 3

credits
449
Published in 2015-10-24 11:31:20 | Show all floors
@Survive-PI I guess you need to invoke the command like this: sudo ./fs_resize
Obviously, don't forget to be in the /usr/local/bin path.
You need to log in before you can reply login | Register

Points Rule

Quick reply Top Return list