Linux Distributions for Orange PI H3 boards

john0815 · Published in 2015-9-24 22:12:26

loboris replied at 2015-9-13 19:13
Tested AP mode, works good using create_ap method.

Before using, install some packages:

I installed the thing and it is running.

How can I start this service automatically.
At git I found something with systemctl but I receive the following message:

root@OrangePI:~# systemctl start create_ap
Failed to get D-Bus connection: Vorgang nicht zulässig

Please can you give a manual how to do.

Thank you

rosimildo · Published in 2015-9-25 01:22:05

Any combination of the modules added to the blackklist, prevents the card from being recognized.

rosimildo · Published in 2015-9-25 01:28:38

I've plugged the "module 3" from my Odroid, and it also falied to load the firmware.... so it seems the image has problems find the FW, even though they're installed.

[  300.260132] usb 4-1: new high-speed USB device number 3 using sunxi-ehci
[  300.686340] rtl8192cu: Chip version 0x10
[  300.763943] rtl8192cu: MAC address: 7c:dd:90:73:56:e2
[  300.763961] rtl8192cu: Board Type 0
[  300.764183] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1
[  300.764284] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw.bin
[  300.764496] usbcore: registered new interface driver rtl8192cu
[  300.765545] rtlwifi: Firmware rtlwifi/rtl8192cufw.bin not available

tomdyg · Published in 2015-9-25 06:50:10

@loboros, thank you for your sharing ! that's great project for OPI. I try to make kernel by your xz package, when I #make parepare, it said "rep: scripts/../arch/x86/syscalls/syscall_32.tbl: No such file or directory", I find the arch directory only have arm sub-directory. Do i need copy x86 sub-directory to arch or you did another way to build the kernel ?

Jacaranda · Published in 2015-9-25 16:46:34

Any body can accep SPI work ?

loboris · Published in 2015-9-25 17:04:53

tomdyg replied at 2015-9-24 23:50
@loboros, thank you for your sharing ! that's great project for OPI. I try to make kernel by your xz ...

The package is for building the kernel on x86 machine, tested on Ubuntu 15.05 64bit.
For building use the included build_linux_kernel.sh script.

loboris · Published in 2015-9-25 17:12:37

Edited by loboris at 2015-9-25 10:24

john0815 replied at 2015-9-24 15:12
I installed the thing and it is running.

How can I start this service automatically.

Have you tried

systemctl enable create_ap

Copy code

as instructed in the link mentioned in my post ?

Useful SystemD commands

john0815 · Published in 2015-9-25 19:07:16

loboris replied at 2015-9-25 17:12
Have you tried
as instructed in the link mentioned in my post ?

Yes I did
I havent the board with me. But I remember that with using the command there is coming a error message.
I let you know which one later.
I think something with Dbus

tomdyg · Published in 2015-9-26 06:31:28

loboris replied at 2015-9-25 17:04
The package is for building the kernel on x86 machine, tested on Ubuntu 15.05 64bit.
For building ...

Thank you loboris, I found another problem for the new kernel, after I shutdown the OPPC, I cannot use start buttom to restart my device, and need to re-plug my power cable...

loboris · Published in 2015-9-27 20:28:26

tomdyg replied at 2015-9-25 23:31
Thank you loboris, I found another problem for the new kernel, after I shutdown the OPPC, I cannot ...

If I'm not mistaken, I think power on with button never worked. I'll try to fix it.