OrangePI-2 Android 4.4.2 New Image

matteobp · Published in 2015-7-7 20:39:06

loboris replied at 2015-7-7 19:20
@matteobp
H265 video examples (1080p and some 4K) from elecard plays without problem in MX Player.
S ...

I'll try the video examples from elecard, I use MX Player too reading the file from a USB pen drive with USB Total Commander Plugin.
Thanks for the suggestion about SATA problem and for the image you're preparing to have SATA port working.

loboris · Published in 2015-7-7 22:11:05

matteobp replied at 2015-7-7 20:39
I'll try the video examples from elecard, I use MX Player too reading the file from a USB pen driv ...

You don't need to use any plugin. USB storage (flash or HD) is automaticaly mounted on /mnt/usbhost/Storage0x

fritz · Published in 2015-7-7 22:54:12

@loboris
Check sys_config.fex --> config.fex
board boots with dram_clk 576 ............

loboris · Published in 2015-7-7 23:34:44

Edited by loboris at 2015-7-7 23:35

fritz replied at 2015-7-7 22:54
@loboris
Check sys_config.fex --> config.fex
board boots with dram_clk 576 ............

After unpacking opi2_lobo_Android_v2.img downloaded from Mega, sys_config.fex contains:

;*****************************************************************************
;sdram configuration
;
;dram_para2 = 0x00001200  ;代表启用dram双通道
;
;dram_para2 = 0x00001100  ;代表启用dram单通道
;
;*****************************************************************************
[dram_para]
dram_clk       = 672
dram_type    = 3
dram_zq       = 0x3b3bfb
dram_odt_en    = 0x1
dram_para1    = 0x10E40000
dram_para2    = 0x0000
dram_mr0       = 0x1840
dram_mr1       = 0x40
dram_mr2       = 0x18
dram_mr3       = 0x2
dram_tpr0    = 0x0048A192
dram_tpr1    = 0x01C2418D
dram_tpr2    = 0x00076051
dram_tpr3    = 0
dram_tpr4    = 0
dram_tpr5    = 0
dram_tpr6    = 100
dram_tpr7    = 0
dram_tpr8    = 0
dram_tpr9    = 0
dram_tpr10    = 0
dram_tpr11    = 0x6aaa0000
dram_tpr12    = 0x7979
dram_tpr13    = 0x800800

fritz · Published in 2015-7-7 23:49:45

CHECK CONFIG.FEX
or if you can not decompile it bootlog with ttl_serial adapter.
you have puzzled some "wrong" pieces.

fritz · Published in 2015-7-8 03:06:24

Same error(s)
for the opi-plus_lobo_Android_v2.img
image not tested yet

loboris · Published in 2015-7-8 05:20:19

fritz replied at 2015-7-8 03:06
Same error(s)
for the opi-plus_lobo_Android_v2.img
image not tested yet

@fritz
I've uploaded new opi2 image opi2_lobo_Android_v3.img.xz, repacked with config.fex compiled from corect sys_config.fex.
I assumed that the packer is doing that, now I did it manually.

Freliix · Published in 2015-7-8 09:44:44

loboris replied at 2015-7-8 05:20
@fritz
I've uploaded new opi2 image opi2_lobo_Android_v3.img.xz, repacked with config.fex compiled ...

Hi Friend, thanks for your help. I tried the firmware of OP +. and ethernet does not work and I had problems with the app from youtube, I leave some images. Speed Wi-Fi is a little slow. there any way to improve it? Thank you.

Freliix · Published in 2015-7-8 10:09:34

garyang replied at 2015-7-4 20:13
yes, it works fine.
But wifi speed is slow.
Today I just repacked it to fit opi plus.

Hello friend, how to package the files in the firmware of OP +?

fritz · Published in 2015-7-8 20:55:05

loboris replied at 2015-7-7 22:20
@fritz
I've uploaded new opi2 image opi2_lobo_Android_v3.img.xz, repacked with config.fex compiled ...

You still use the orig uImage (kernel) from this sunchipboard.
Is this wanted or ....?
If yes, works it better on opi2 then @stevens uImage?

Surely not on opi plus.

OrangePI-2 Android 4.4.2 New Image

This thread contains more resources