H3Droid - Android image developed specifically to work on Allwinner H3 devices

amir.movafagh · Published in 2019-6-12 13:57:35

kotcza replied at 2019-6-11 18:08
please try adding to /data/rc.local: modprobe hid-multitouch
i had to modularize this driver to make ...

thanks its work

amir.movafagh · Published in 2019-6-12 14:34:09

kotcza replied at 2019-6-11 18:08
please try adding to /data/rc.local: modprobe hid-multitouch
i had to modularize this driver to make ...

is this possible to work with uart pins on gpio ports ?

kotcza · Published in 2019-6-12 18:11:13

yes, or boot to h3resc and edit /mnt/data/rc.local

amir.movafagh · Published in 2019-6-13 14:38:17

kotcza replied at 2019-6-12 18:11
yes, or boot to h3resc and edit /mnt/data/rc.local

after first boot up and set the uboot and fex and run os , i cant open h3-rescue mode with press space bar

kotcza · Published in 2019-6-13 19:48:57

long press on 'restart' in android to boot to h3resc

amir.movafagh · Published in 2019-6-18 18:40:10

kotcza replied at 2019-6-13 19:48
long press on 'restart' in android to boot to h3resc

thanks

is there any way to connect i2c touchscreen directly to i2c gpio pins ?

i do this with a serial gps and conect that to serial ttyS1 and work fine

shooreg · Published in 2019-6-19 16:48:51

Strange thing with CSR8510 A10 bluetooth dongle: it is recognized by kernel,

<6>[ 3.046106] usb 8-1: New USB device found, idVendor=0a12, idProduct=0001
<6>[ 3.046134] usb 8-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
<6>[ 3.046156] usb 8-1: Product: CSR8510 A10

hciconfig and hcitool work, I can bring it up as hci0 device
root@dolphin-fvd-p1:/ # hciconfig
hci0: Type: Primary Bus: USB
BD Address: 00:1A:7D

A:71:13  ACL MTU: 310:10  SCO MTU: 64:8
      UP RUNNING
      RX bytes:1146 acl:0 sco:0 events:61 errors:0
      TX bytes:977 acl:0 sco:0 commands:61 errors:0

and perform a successful scan from a command line -
root@dolphin-fvd-p1:/ # hcitool scan
Scanning ...
      88:6B:0F:B0

6:95 PAUL-18
88:6B:0F:B0

6:37 TRACT TR-7
CE

0:46:03:35:72 BV5000

But in Android UI bluetooth is totally dead - none of bluetooth apps work, and in settings it can't be turned ON.

shooreg · Published in 2019-6-19 19:36:36

shooreg replied at 2019-6-19 11:48
Strange thing with CSR8510 A10 bluetooth dongle: it is recognized by kernel,

[ 3.046106] usb 8- ...

Downgraded from 1.3.5. to 1.3.4 and it works.

twothousandsix · Published in 2019-6-29 03:49:56

Edited by twothousandsix at 2019-6-29 04:02

just wanted to thank you guys for making h3droid, it was really easy to set up an iptv box with this distro on an orange pi one, even a soldered ir receiver works when enabling ir on the .fex and loading the sunxi-ir module in /data/rc so those features came really in handy
i did experience some crashes when running streams in 1080p mode probably because of the lack of ram, but as suggested in your webpage switching to 720p (and adding a heatsink and fan) seems to have fixed that issue

Treschanke · Published in 2019-7-18 06:50:14

"Enabled Kernel Module: ads7846_device (loader)"

Does this mean that I can use a touchscreen LCD on H3Droid?