View: 5329|Reply: 0

OPI Plus unable to enumerate USB device

[Copy link]

2

threads

6

posts

49

credits

Novice

Rank: 1

credits
49
Published in 2015-12-18 09:54:57 | Show all floors |Read mode
I have a Sansa Fuze that has two USB devices(SD card and internal memory).

The SD card device doesn't get added.

dmesg
[53302.040367] usb 2-1.3: new high-speed USB device number 9 using sunxi-ehci
[53304.140592] hub 2-1:1.0: unable to enumerate USB device on port 3
[53304.640363] usb 2-1.3: new high-speed USB device number 10 using sunxi-ehci
[53304.772820] scsi3 : usb-storage 2-1.3:1.0
[53305.775195] scsi 3:0:0:0: Direct-Access     SanDisk  Sansa Fuze 8GB   v01. PQ: 0 ANSI: 0
[53305.778001] sd 3:0:0:0: [sdb] 15990784 512-byte logical blocks: (8.18 GB/7.62 GiB)
[53305.778853] sd 3:0:0:0: [sdb] Write Protect is off
[53305.778883] sd 3:0:0:0: [sdb] Mode Sense: 04 00 00 00


blkid
/dev/mmcblk0p1: LABEL="BOOT" UUID="A56E-2081" TYPE="vfat" PARTUUID="7a47e671-01"
/dev/mmcblk0p2: LABEL="linux" UUID="110e512e-0588-4ee1-b260-f187b55636db" TYPE="ext4" PARTUUID="7a47e671-02"
/dev/mmcblk1p1: UUID="57f8f4bc-abf4-655f-bf67-946fc0f9f25b" TYPE="ext4"
/dev/mmcblk1p2: SEC_TYPE="msdos" LABEL="Volumn" TYPE="vfat"
/dev/mmcblk1p7: UUID="57f8f4bc-abf4-655f-bf67-946fc0f9f25b" TYPE="ext4"
/dev/mmcblk1p11: LABEL="PRIVATE" UUID="AB90-07B2" TYPE="vfat"
/dev/mmcblk1p12: SEC_TYPE="msdos" UUID="9B90-07B2" TYPE="vfat"
/dev/mmcblk1p16: UUID="57f8f4bc-abf4-655f-bf67-946fc0f9f25b" TYPE="ext4"
/dev/sdb: LABEL="SANSA FUZE" UUID="5480-4990" TYPE="vfat"
/dev/mmcblk0: PTUUID="7a47e671" PTTYPE="dos"
/dev/mmcblk1: PTTYPE="dos"


sdb shows  as the internal memory so the cable andUSB port seem to be working. I have no idea where to look. Any suggestions welcome. I have a Perl script that loads podcasts onto the SD in the player and it works fine on my Raspberry Pi.
You need to log in before you can reply login | Register

Points Rule

Quick reply Top Return list