please choosego to mobile | Continue to access the PC version
View: 16560|Reply: 71

Orange Pi PC Plus loads and it fails !!!

[Copy link]

2

threads

3

posts

78

credits

Registered member

Rank: 2

credits
78
Published in 2020-11-9 23:09:11 | Show all floors |Read mode
Hello
I have an Orange Pi PC Plus I loaded Armbian but when I reboot now the pi loads and it fails !!!

I tried with ubuntu, Android, debian and all bugs !!

Why ???

Thank you so much


  1. U-Boot SPL 2019.04 (Nov 05 2019 - 21:07:23 +0800)
  2. DRAM: 1024 MiB
  3. Trying to boot from MMC1


  4. U-Boot 2019.04 (Nov 05 2019 - 21:07:23 +0800) Allwinner Technology

  5. CPU:   Allwinner H3 (SUN8I 1680)
  6. Model: Xunlong Orange Pi PC Plus
  7. DRAM:  1 GiB
  8. MMC:   Device 'mmc@1c11000': seq 1 is in use by 'mmc@1c10000'
  9. mmc@1c0f000: 0, mmc@1c10000: 2, mmc@1c11000: 1
  10. Loading Environment from FAT... Unable to use mmc 1:1... In:    serial
  11. Out:   serial
  12. Err:   serial
  13. Net:   phy interface0
  14. eth0: ethernet@1c30000
  15. 230456 bytes read in 14 ms (15.7 MiB/s)
  16. starting USB...
  17. USB0:   USB EHCI 1.00
  18. USB1:   USB OHCI 1.0
  19. USB2:   USB EHCI 1.00
  20. USB3:   USB OHCI 1.0
  21. USB4:   USB EHCI 1.00
  22. USB5:   USB OHCI 1.0
  23. USB6:   USB EHCI 1.00
  24. USB7:   USB OHCI 1.0
  25. scanning bus 0 for devices... 1 USB Device(s) found
  26. scanning bus 1 for devices... 1 USB Device(s) found
  27. scanning bus 2 for devices... 1 USB Device(s) found
  28. scanning bus 3 for devices... 1 USB Device(s) found
  29. scanning bus 4 for devices... 1 USB Device(s) found
  30. scanning bus 5 for devices... 1 USB Device(s) found
  31. scanning bus 6 for devices... 1 USB Device(s) found
  32. scanning bus 7 for devices... 1 USB Device(s) found
  33.        scanning usb for storage devices... 0 Storage Device(s) found
  34. Autoboot in 2 seconds, press <Space> to stop
  35. switch to partitions #0, OK
  36. mmc0 is current device
  37. Scanning mmc 0:1...
  38. Found U-Boot script /boot.scr
  39. 3700 bytes read in 3 ms (1.2 MiB/s)
  40. ## Executing script at 43100000
  41. U-boot loaded from SD
  42. Boot script loaded from mmc
  43. 86 bytes read in 1 ms (84 KiB/s)
  44. 5876450 bytes read in 281 ms (19.9 MiB/s)
  45. 7745856 bytes read in 370 ms (20 MiB/s)
  46. Found mainline kernel configuration
  47. 30628 bytes read in 4 ms (7.3 MiB/s)
  48. ## Loading init Ramdisk from Legacy Image at 43300000 ...
  49.    Image Name:   uInitrd
  50.    Image Type:   ARM Linux RAMDisk Image (gzip compressed)
  51.    Data Size:    5876386 Bytes = 5.6 MiB
  52.    Load Address: 00000000
  53.    Entry Point:  00000000
  54.    Verifying Checksum ... OK
  55. ## Flattened Device Tree blob at 43000000
  56.    Booting using the fdt blob at 0x43000000
  57. EHCI failed to shut down host controller.
  58.    Loading Ramdisk to 49a65000, end 49fffaa2 ... OK
  59.    Loading Device Tree to 499f5000, end 49a64fff ... OK

  60. Starting kernel ...

  61. Loading, please wait...
  62. starting version 229
  63. Begin: Loading essential drivers ... done.
  64. Begin: Running /scripts/init-premount ... done.
  65. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  66. Begin: Running /scripts/local-premount ... done.
  67. Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done.
  68. Begin: Running /scripts/local-block ... done.
  69. Begin: Running /scripts/local-block ... done.
  70. Begin: Running /scripts/local-block ... done.
  71. Begin: Running /scripts/local-block ... done.
  72. Begin: Running /scripts/local-block ... done.
  73. Begin: Running /scripts/local-block ... done.
  74. Begin: Running /scripts/local-block ... done.
  75. Begin: Running /scripts/local-block ... done.
  76. Begin: Running /scripts/local-block ... done.
  77. Begin: Running /scripts/local-block ... done.
  78. Begin: Running /scripts/local-block ... done.
  79. Begin: Running /scripts/local-block ... done.
  80. Begin: Running /scripts/local-block ... done.
  81. Begin: Running /scripts/local-block ... done.
  82. Begin: Running /scripts/local-block ... done.
  83. Begin: Running /scripts/local-block ... done.
  84. Begin: Running /scripts/local-block ... done.
  85. Begin: Running /scripts/local-block ... done.
  86. Begin: Running /scripts/local-block ... done.
  87. Begin: Running /scripts/local-block ... done.
  88. Begin: Running /scripts/local-block ... done.
  89. Begin: Running /scripts/local-block ... done.
  90. Begin: Running /scripts/local-block ... done.
  91. Begin: Running /scripts/local-block ... done.
  92. Begin: Running /scripts/local-block ... done.
  93. Begin: Running /scripts/local-block ... done.
  94. Begin: Running /scripts/local-block ... done.
  95. Begin: Running /scripts/local-block ... done.
  96. Begin: Running /scripts/local-block ... done.
  97. done.
  98. Gave up waiting for root device.  Common problems:
  99. - Boot args (cat /proc/cmdline)
  100.    - Check rootdelay= (did the system wait long enough?)
  101.    - Check root= (did the system wait for the right device?)
  102. - Missing modules (cat /proc/modules; ls /dev)
  103. ALERT!  /dev/mmcblk0p2 does not exist.  Dropping to a shell!
  104. Rebooting automatically due to panic= boot argument
  105. [   53.109810] reboot: Restarting system

  106. U-Boot SPL 2020.04-armbian (Sep 02 2020 - 10:21:09 +0200)
  107. DRAM: 1024 MiB
  108. Trying to boot from MMC2


  109. U-Boot 2020.04-armbian (Sep 02 2020 - 10:21:09 +0200) Allwinner Technology

  110. CPU:   Allwinner H3 (SUN8I 1680)
  111. Model: Xunlong Orange Pi PC Plus
  112. DRAM:  1 GiB
  113. MMC:   Device 'mmc@1c11000': seq 1 is in use by 'mmc@1c10000'
  114. mmc@1c0f000: 0, mmc@1c10000: 2, mmc@1c11000: 1
  115. Loading Environment from FAT... Unable to use mmc 1:1... In:    serial
  116. Out:   serial
  117. Err:   serial
  118. Net:   phy interface0
  119. eth0: ethernet@1c30000
  120. starting USB...
  121. Bus usb@1c1a000: USB EHCI 1.00
  122. Bus usb@1c1a400: USB OHCI 1.0
  123. Bus usb@1c1b000: USB EHCI 1.00
  124. Bus usb@1c1b400: USB OHCI 1.0
  125. Bus usb@1c1c000: USB EHCI 1.00
  126. Bus usb@1c1c400: USB OHCI 1.0
  127. Bus usb@1c1d000: USB EHCI 1.00
  128. Bus usb@1c1d400: USB OHCI 1.0
  129. scanning bus usb@1c1a000 for devices... 1 USB Device(s) found
  130. scanning bus usb@1c1a400 for devices... 1 USB Device(s) found
  131. scanning bus usb@1c1b000 for devices... 1 USB Device(s) found
  132. scanning bus usb@1c1b400 for devices... 1 USB Device(s) found
  133. scanning bus usb@1c1c000 for devices... 1 USB Device(s) found
  134. scanning bus usb@1c1c400 for devices... 1 USB Device(s) found
  135. scanning bus usb@1c1d000 for devices... 1 USB Device(s) found
  136. scanning bus usb@1c1d400 for devices... 1 USB Device(s) found
  137.        scanning usb for storage devices... 0 Storage Device(s) found
  138. Autoboot in 1 seconds, press <Space> to stop
  139. switch to partitions #0, OK
  140. mmc1(part 0) is current device
  141. Scanning mmc 1:1...
  142. Found U-Boot script /boot/boot.scr
  143. 3967 bytes read in 1 ms (3.8 MiB/s)
  144. ## Executing script at 43100000
  145. U-boot loaded from eMMC or secondary SD
  146. Boot script loaded from mmc
  147. 202 bytes read in 1 ms (197.3 KiB/s)
  148. 11493477 bytes read in 547 ms (20 MiB/s)
  149. 7788240 bytes read in 371 ms (20 MiB/s)
  150. Found mainline kernel configuration
  151. 32586 bytes read in 4 ms (7.8 MiB/s)
  152. 4185 bytes read in 4 ms (1021.5 KiB/s)
  153. Applying kernel provided DT fixup script (sun8i-h3-fixup.scr)
  154. ## Executing script at 45000000
  155. ## Loading init Ramdisk from Legacy Image at 43300000 ...
  156.    Image Name:   uInitrd
  157.    Image Type:   ARM Linux RAMDisk Image (gzip compressed)
  158.    Data Size:    11493413 Bytes = 11 MiB
  159.    Load Address: 00000000
  160.    Entry Point:  00000000
  161.    Verifying Checksum ... OK
  162. ## Flattened Device Tree blob at 43000000
  163.    Booting using the fdt blob at 0x43000000
  164. EHCI failed to shut down host controller.
  165.    Loading Ramdisk to 49509000, end 49fff025 ... OK
  166.    Loading Device Tree to 49498000, end 49508fff ... OK

  167. Starting kernel ...

  168. Uncompressing Linux... done, booting the kernel.
Copy code




2

threads

3

posts

78

credits

Registered member

Rank: 2

credits
78
 Author| Published in 2020-11-10 21:37:04 | Show all floors
In fact the raspberry Orange Pi PC Plus mache but the UART port comes out of debugging when the HDMI output is activated the UART port is muted.

How to see the prompt and place a linux command with PuTTY, ....

Thank you

0

threads

6

posts

52

credits

Registered member

Rank: 2

credits
52
Published in 2022-1-1 16:37:09 | Show all floors
siliconvalleyrecovery        Silicon Valley Recovery Roundtable Delivers Roadmap to a “Better Normal” for Community—Immediately & Long Term. Mountain View, Calif.        https://siliconvalleyrecovery.com/

0

threads

6

posts

22

credits

Novice

Rank: 1

credits
22
Published in 2023-8-7 11:47:33 | Show all floors
You can check the checksum or hash of the downloaded image mapquest directions to ensure its integrity.

0

threads

10

posts

34

credits

Novice

Rank: 1

credits
34
Published in 2023-8-21 11:47:32 | Show all floors
Fostering strong relationships and seeking support Geometry Dash when needed are also vital steps toward maintaining emotional equilibrium.

0

threads

17

posts

64

credits

Registered member

Rank: 2

credits
64
Published in 2023-9-13 17:23:09 | Show all floors
subway surfers online offers endless hours of fun and entertainment. The different locations and settings add variety to the gameplay.

0

threads

51

posts

148

credits

Registered member

Rank: 2

credits
148
Published in 2023-11-4 16:31:55 | Show all floors
I appreciate your posting. I've read about a lot of related subjects! Contrary to other articles, yours left me with a really distinct impression. I hope you'll keep writing insightful posts like this one and others for us to everyone to read! retro games

16

threads

1089

posts

2778

credits

Gold member

Rank: 6Rank: 6

credits
2778
Published in 2023-11-5 22:34:37 | Show all floors
I’m empowered together with the surpassing plus preachy detailing for you to decorate such minimal timing.        best ghostwriting services

16

threads

1089

posts

2778

credits

Gold member

Rank: 6Rank: 6

credits
2778
Published in 2023-11-8 23:26:52 | Show all floors
That i taken aback when using the exploration everyone intended to get this to selected present astounding. Terrific process!        Cafe Restaurant Seminyak

0

threads

1

posts

8

credits

Novice

Rank: 1

credits
8
Published in 2023-11-9 15:01:33 | Show all floors
This post was finally edited by klestaum at 2023-11-9 15:04

The first level will show a picture of how the controls work. Once you get your dragon close enough, it will consume the prey.

geometry dash subzero



You need to log in before you can reply login | Register

Points Rule

Quick reply Top Return list