Add to favorites|Orangepi
Turn on secondary access
search
Hot search: orangepi
My Center
OrangePi»Forum › Using the Orange Pi Series › Troubleshooting › Trouble booting Orange Pi Plus
Return to list Post new posts
View: 9013|Reply: 8

Trouble booting Orange Pi Plus

[Copy link]
man44

1

threads

5

posts

51

credits

Registered member

Rank: 2

credits
51
Published in 2015-6-29 21:08:31 | Show all floors |Read mode
Edited by man44 at 2015-6-29 21:19

Hi! Suddenly my Orange Pi Plus can not boot. He worked on the android from Nand. After connecting the power supply is not lit red LED. Also not loaded with sdcard. Help, what to do?

Recorded log from the terminal via the USB-TTL without sdcard:

  1. HELLO! BOOT0 is starting!
  2. boot0 version : 4.0.0
  3. fel_flag = 0x00000000
  4. rtc[0] value = 0x00000000
  5. rtc[1] value = 0x00000000
  6. rtc[2] value = 0x00000000
  7. rtc[3] value = 0x00000000
  8. rtc[4] value = 0x00000000
  9. rtc[5] value = 0x00000000
  10. rtc[6] value = 0x00000000
  11. rtc[7] value = 0x00000000
  12. DRAM DRIVE INFO: V0.8
  13. DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  14. DRAM CLK = 672 MHz
  15. DRAM zq value: 003b3bfb
  16. READ DQS LCDL = 001c1d1d
  17. DRAM SIZE =1024 M
  18. odt delay
  19. dram size =1
  20. card boot number = 2
  21. card no is 2
  22. sdcard 2 line count 8
  23. [mmc]: mmc driver ver 2014-12-10 21:20:39
  24. [mmc]: ***Try SD card 2***
  25. [mmc]: mmc 2 cmd 8 err 00000100
  26. [mmc]: mmc 2 cmd 8 err 00000100
  27. [mmc]: mmc 2 send if cond failed
  28. [mmc]: mmc 2 cmd 55 err 00000100
  29. [mmc]: mmc 2 cmd 55 err 00000100
  30. [mmc]: mmc 2 send app cmd failed
  31. [mmc]: ***Try MMC card 2***
  32. [mmc]: 8bit ddr!!!
  33. [mmc]: MMC ver 4.5
  34. [mmc]: SD/MMC Card: 8bit, capacity: 7475MB
  35. [mmc]: vendor: Man 00880103 Snr 200c0057
  36. [mmc]: product: NCard
  37. [mmc]: revision: 2.0
  38. [mmc]: ***SD/MMC 2 init OK!!!***
  39. sdcard 2 init ok
  40. The size of uboot is 800dc000.
  41. HELLO! BOOT0 is starting!
  42. boot0 version : 4.0.0
  43. fel_flag = 0x00000000
  44. rtc[0] value = 0x00000000
  45. rtc[1] value = 0x00000000
  46. rtc[2] value = 0x00000000
  47. rtc[3] value = 0x00000000
  48. rtc[4] value = 0x00000000
  49. rtc[5] value = 0x00000000
  50. rtc[6] value = 0x00000000
  51. rtc[7] value = 0x00000000
  52. DRAM DRIVE INFO: V0.8
  53. DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  54. DRAM CLK = 672 MHz
  55. DRAM zq value: 003b3bfb
  56. READ DQS LCDL = 001d1d1d
  57. DRAM SIZE =1024 M
  58. odt delay
  59. dram size =1024
  60. card boot number = 2
  61. card no is 2
  62. sdcard 2 line count 8
  63. [mmc]: mmc driver ver 2014-12-10 21:20:39
  64. [mmc]: ***Try SD card 2***
  65. [mmc]: mmc 2 cmd 8 err 00000100
  66. [mmc]: mmc 2 cmd 8 err 00000100
  67. [mmc]: mmc 2 send if cond failed
  68. [mmc]: mmc 2 cmd 55 err 00000100
  69. [mmc]: mmc 2 cmd 55 err 00000100
  70. [mmc]: mmc 2 send app cmd failed
  71. [mmc]: ***Try MMC card 2***
  72. [mmc]: 8bit ddr!!!
  73. [mmc]: MMC ver 4.5
  74. [mmc]: SD/MMC Card: 8bit, capacity: 7475MB
  75. [mmc]: vendor: Man 00880103 Snr 200c0057
  76. [mmc]: product: NCard
  77. [mmc]: revision: 2.0
  78. [mmc]: ***SD/MMC 2 init OK!!!***
  79. sdcard 2 init ok
  80. The size of uboot is 000dc000.
  81. sum=74220f4d
  82. src_sum=f4220f4d
  83. Fail in checking uboot.
  84. ERROR! NOT find the head of uboot.
  85. read all u-boot blk failed

  87. Ready to disable icache.
Copy code


And a log from a terminal with inserted sdcard  with Lubuntu_1404_For_OrangePiplus_v0_8_0:

  1. HELLO! BOOT0 is starting!
  2. boot0 version : 4.0.0
  3. fel_flag = 0x00000000
  4. rtc[0] value = 0x00000000
  5. rtc[1] value = 0x00000000
  6. rtc[2] value = 0x00000000
  7. rtc[3] value = 0x00000000
  8. rtc[4] value = 0x00000000
  9. rtc[5] value = 0x00000000
  10. rtc[6] value = 0x00000000
  11. rtc[7] value = 0x00000000
  12. DRAM DRIVE INFO: V0.8
  13. DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  14. DRAM CLK = 672 MHz
  15. DRAM zq value: 003b3bfb
  16. READ DQS LCDL = 001d1d1d
  17. DRAM SIZE =1024 M
  18. odt delay
  19. dram size =1
  20. card boot number = 0
  21. card no is 0
  22. sdcard 0 line count 4
  23. [mmc]: mmc driver ver 2014-12-10 21:20:39
  24. [mmc]: ***Try SD card 0***
  25. [mmc]: SD/MMC Card: 4bit, capacity: 7580MB
  26. [mmc]: vendor: Man 00035344 Snr 028e163a
  27. [mmc]: product: SL08G
  28. [mmc]: revision: 8.0
  29. [mmc]: ***SD/MMC 0 init OK!!!***
  30. sdcard 0 init ok
  31. The size of uboot is 800dc000.
  32. HELLO! BOOT0 is starting!
  33. boot0 version : 4.0.0
  34. fel_flag = 0x00000000
  35. rtc[0] value = 0x00000000
  36. rtc[1] value = 0x00000000
  37. rtc[2] value = 0x00000000
  38. rtc[3] value = 0x00000000
  39. rtc[4] value = 0x00000000
  40. rtc[5] value = 0x00000000
  41. rtc[6] value = 0x00000000
  42. rtc[7] value = 0x00000000
  43. DRAM DRIVE INFO: V0.8
  44. DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  45. DRAM CLK = 672 MHz
  46. DRAM zq value: 003b3bfb
  47. READ DQS LCDL = 001d1e1e
  48. DRAM SIZE =1024 M
  49. odt delay
  50. dram size =1
  51. card boot number = 2
  52. card no is 2
  53. sdcard 2 line count 8
  54. [mmc]: mmc driver ver 2014-12-10 21:20:39
  55. [mmc]: ***Try SD card 2***
  56. [mmc]: mmc 2 cmd 8 err 00000100
  57. [mmc]: mmc 2 cmd 8 err 00000100
  58. [mmc]: mmc 2 send if cond failed
  59. [mmc]: mmc 2 cmd 55 err 00000100
  60. [mmc]: mmc 2 cmd 55 err 00000100
  61. [mmc]: mmc 2 send app cmd failed
  62. [mmc]: ***Try MMC card 2***
  63. [mmc]: 8bit ddr!!!
  64. [mmc]: MMC ver 4.5
  65. [mmc]: SD/MMC Card: 8bit, capacity: 7475MB
  66. [mmc]: vendor: Man 00880103 Snr 200c0057
  67. [mmc]: product: NCard
  68. [mmc]: revision: 2.0
  69. [mmc]: ***SD/MMC 2 init OK!!!***
  70. sdcard 2 init ok
  71. The size of uboot is 000dc000.
  72. sum=74220f4d
  73. src_sum=f4220f4d
  74. Fail in checking uboot.
  75. ERROR! NOT find the head of uboot.
  76. read all u-boot blk failed
  77. Ready to disable icache.
  78. HELLO! BOOT0 is starting!
  79. boot0 version : 4.0.0
  80. fel_flag = 0x00000000
  81. rtc[0] value = 0x00000000
  82. rtc[1] value = 0x00000000
  83. rtc[2] value = 0x00000000
  84. rtc[3] value = 0x00000000
  85. rtc[4] value = 0x00000000
  86. rtc[5] value = 0x00000000
  87. rtc[6] value = 0x00000000
  88. rtc[7] value = 0x00000000
  89. DRAM DRIVE INFO: V0.8
  90. DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  91. DRAM CLK = 672 MHz
  92. DRAM zq value: 003b3bfb
  93. READ DQS LCDL = 001d1d1d
  94. DRAM SIZE =1024 M
  95. odt delay
  96. dram size =1
  97. card boot number = 2
  98. card no is 2
  99. sdcard 2 line count 8
  100. [mmc]: mmc driver ver 2014-12-10 21:20:39
  101. [mmc]: ***Try SD card 2***
  102. [mmc]: mmc 2 cmd 8 err 00000100
  103. [mmc]: mmc 2 cmd 8 err 00000100
  104. [mmc]: mmc 2 send if cond failed
  105. [mmc]: mmc 2 cmd 55 err 00000100
  106. [mmc]: mmc 2 cmd 55 err 00000100
  107. [mmc]: mmc 2 send app cmd failed
  108. [mmc]: ***Try MMC card 2***
  109. [mmc]: 8bit ddr!!!
  110. [mmc]: MMC ver 4.5
  111. [mmc]: SD/MMC Card: 8bit, capacity: 7475MB
  112. [mmc]: vendor: Man 00880103 Snr 200c0057
  113. [mmc]: product: NCard
  114. [mmc]: revision: 2.0
  115. [mmc]: ***SD/MMC 2 init OK!!!***
  116. sdcard 2 init ok
  117. The size of uboot is 000dc000.
  118. sum=f4220f4d
  119. src_sum=f4220f4d
  120. set_mmc_para,sdly 50M 0
  121. set_mmc_para,sdly 25M 0
  122. Succeed in loading uboot from sdmmc flash.
  123. Ready to disable icache.
  124. Jump to secend Boot.
  125. SUNXI_NORMAL_MODE
  126. [      0.256]e mode

  128. U-Boot 2011.09-rc1 (Mar 13 2015 - 12:54:51) Allwinner Techno
Copy code


Reply

Use magic report

man44

1

threads

5

posts

51

credits

Registered member

Rank: 2

credits
51
 Author| Published in 2015-7-4 22:45:50 | Show all floors
this is my video with problem https://www.youtube.com/watch?v=2Xxols6WAjA Power is ok, but Orange Pi not working.
Reply Support opposition

Use magic report

fritz

5

threads

354

posts

2724

credits

Moderator

Rank: 7Rank: 7Rank: 7

credits
2724
Published in 2015-7-5 00:16:34 | Show all floors
What kind of power supply you uses?
my orange pi + does NOT boot with 5V 1,5A power supply.
Minimum it needs 5V 2A
H3 needs power! for booting
Boards:
orangepi plus, olinuxino A20, cubieboard A10, mele A2000 .....
Reply Support opposition

Use magic report

man44

1

threads

5

posts

51

credits

Registered member

Rank: 2

credits
51
 Author| Published in 2015-7-5 16:49:01 | Show all floors
I use this http://www.aliexpress.com/store/ ... ?isOrig=true#extend adapter. Earlier all worked fine.
Reply Support opposition

Use magic report

gipsy

0

threads

6

posts

289

credits

Intermediate member

Rank: 3Rank: 3

credits
289
Published in 2015-7-14 19:59:45 | Show all floors
I have the same problem with my OPI+
At first i tried a 5v 2a charger, the LED always red (with and without SD).
I use a 5v 2a regulator (adjusted to excactly 5v) with SD the led always red, without sd it changes to green but it doesn't work with my hdmi to dvi cable. I'm gonna try to use a a/v output cable.
I go to a friend and we try to power it with a laboratory power supply. The same results with the regulator. The max current we tried was 3A.
What else can i check??

Thanks
Reply Support opposition

Use magic report

man44

1

threads

5

posts

51

credits

Registered member

Rank: 2

credits
51
 Author| Published in 2015-7-15 21:18:34 | Show all floors
you have at least lit LEDs, it says its working condition. At me even no LEDs are off. I think that my OPi + failed.

[rus] у тебя хотя бы горят светодиоды, это говорит о его рабочем состоянии. У меня же даже светодиоды никакие не горят. Думаю что мой OPi + вышел из строя.
Reply Support opposition

Use magic report

Published in 2015-7-15 22:04:04 | Show all floors
Edited by bronco at 2015-7-15 22:19
man44 replied at 2015-7-15 21:18
I think that my OPi + failed

If you always handled it like seen in your video then it's maybe caused by ESD?
Reply Support opposition

Use magic report

man44

1

threads

5

posts

51

credits

Registered member

Rank: 2

credits
51
 Author| Published in 2015-7-16 04:43:29 | Show all floors
bronco replied at 2015-7-15 22:04
If you always handled it like seen in your video then it's maybe caused by ESD?

No. He stopped working while running, I did not touch him.
Reply Support opposition

Use magic report

shahe_ansar

4

threads

44

posts

165

credits

Registered member

Rank: 2

credits
165
Published in 2016-1-4 03:55:45 | Show all floors
You don't need to touch it. Your bed is more than just enough to kill it, since it's probably brimming with static charge
Reply Support opposition

Use magic report

Return to list Post new posts
Advanced mode
B Color Image Link Quote Code Smilies
You need to log in before you can reply login | Register

Points Rule

Archiver|Mobile edition|Darkroom| OrangePi En ( 粤ICP备14086627号-2 )

GMT+8, 2024-11-24 15:55 , Processed in 0.014373 second(s), 20 queries .

Powered by Discuz! X3.4

© 2005-2022 Orangepibbs en.

Quick reply Top Return list