View: 8690|Reply: 3

Orange Pi 2G-IoT Boot Issue

[Copy link]

4

threads

8

posts

70

credits

Registered member

Rank: 2

credits
70
Published in 2017-9-26 18:34:21 | Show all floors |Read mode
I am attempting to boot my Orange Pi 2G-IoT for the first time but I am getting an error on each flavour of OS (raspbian server, ubuntu and armbian) I attempt. I have even used different SD cards but still no avail.
Card Used :
  • San Disk 8 G.B. Class 10
  • San Disk 16 G.B. Class 10
  • Samsung Evo 32 G.B. Class 10

These cards are working properly on other boards. I have successfully booted Orange Pi Zero with San Disk 8 G.B. Class 10 and San Disk 16 G.B. Class 10 SD cards. Samsung Evo 32 G.B. Class 10 card works seamlessly with my Raspberry Pi 3.

Serial Debug Connection Settings :
  • Baud                             : 921600
  • No. of Bits                     : 8
  • Parity                            : None
  • Hardware Flow Control : None
  • Software Flow Control  : None

Raspbian Server Boot Error :
RDA8810 Boot_ROM V1.6
HW_CFG: 0286
SW_CFG: 0000
Load EMMC
Open eMMC
EMMC OCR timeout
Open eMMC card Failed
Load EMMC Fail
Load SD
Open SD card
mcd_Open
Response is Time out
ACMD xx Response Error
ACMD41, Retry Timeout
Open SD card Failed
Load SD Fail
Setup USB PLL done
Setup BUS PLL done
reset musb otg core...
Press 'Q' to quit PDL loading
wait for connect....


Armbian Boot Error :
RDA8810 Boot_ROM V1.6
HW_CFG: 0286
SW_CFG: 0000
Load EMMC
Open eMMC
EMMC OCR timeout
Open eMMC card Failed
Load EMMC Fail
Load SD
Open SD card
mcd_Open
Response is Time out
cmd55 response error
ACMD41, No Response, MMC Card?
MMC Card
Open SD card Failed
Load SD Fail
Setup USB PLL done
Setup BUS PLL done
reset musb otg core...
Press 'Q' to quit PDL loading
wait for connect....

Ubuntu Boot Error :
RDA8810 Boot_ROM V1.6
HW_CFG: 0286
SW_CFG: 0000
Load EMMC
Open eMMC
EMMC OCR timeout
Open eMMC card Failed
Load EMMC Fail
Load SD
Open SD card
mcd_Open
Response is Time out
cmd55 response error
ACMD41, No Response, MMC Card?
MMC Card
Open SD card Failed
Load SD Fail
Setup USB PLL done
Setup BUS PLL done
reset musb otg core...
Press 'Q' to quit PDL loading
wait for connect....

Is my Orange Pi 2G-IoT SBC defective or is their something I am missing???
Kindly advice.

4

threads

8

posts

70

credits

Registered member

Rank: 2

credits
70
 Author| Published in 2017-9-27 13:10:36 | Show all floors
JRios replied at 2017-9-26 20:33
OPi 2G-IoT and OPi i96 (RDA8188 SoCs) looks like there are based in old smartphone devices and a som ...

Thanks for the info. Tried with San Disk 8 G. B. Class 4. The system finally booted. Will try to flash Linux on NAND.

0

threads

12

posts

60

credits

Registered member

Rank: 2

credits
60
Published in 2023-3-4 12:20:45 | Show all floors
There could be several reasons why you are experiencing incredibox this issue with your Orange Pi 2G-IoT board. Make sure that the boot settings are correctly configured for the specific OS you are using. For example, Raspbian requires a different boot configuration than Ubuntu or Armbian.

0

threads

1

posts

6

credits

Novice

Rank: 1

credits
6
Published in 2023-10-14 17:36:22 | Show all floors
I like this website   because so much useful    material on here : D.        Gacha Life 2
You need to log in before you can reply login | Register

Points Rule

Quick reply Top Return list