View: 3526|Reply: 4

Chosing A Board

[Copy link]

1

threads

8

posts

22

credits

Novice

Rank: 1

credits
22
Published in 2017-8-28 07:21:45 | Show all floors |Read mode
               
Welcome Newcomers!
This is a guide for Orange Pi boards doto the many choices I have made a graph of all of them  if you havemore info please send it and  I will put it in.  I did not include power usage (startup running) which is important as I do not have that info
                                               
model
prosessor
speed
ram
ethernet
wifi
bluetooth
IR
Card
Pin Header
video
camera
audio
Usb
power switch
Dedicated Power
Debug
battery
other
size
Weight
Price
PI Zero
H2 Cortex A7
1.2 quad
256/512
100m POE
XR819 B/G/N
Micro SD
26 and 13
1 + OTG
Yes
48 x 46
26
6.99/8.99
Pi Zero Plus 2
H3 Cortex A7/ H5 Cortex A53
1.2 quad
512 DDR
Ap6212 B/G/N
Yes 4.2
TF/ MMC
26 and 13
HDMI
CSI
OTG
Yes
8Gb EMMC
48 x 46
36
18.9
Pi One
H3 Cortex A7
1.2 quad
256 DDR
100M
TF/ MMC
40
HDMI
CSI
1 + OTG
Yes
Yes
48 x 69
36
9.99
PI One Lite
H3 Cortex A7
1.2 quad
512 DDR
Yes?
Yes
TF/ MMC
40
HDMI
CSI
Mic
2 + OTG
Yes
Yes
48 x 69
60
12
Pi i96
ARM Cortex-A5
256 LPDDR2
RDA5991
yes
TF/ MMC
40
CSI
1 + OTG
Yes
Yes
500 Mb NAND Flash
30 x 60
30
PI R1
H2 Cortex A7
256 DDR
2x 10/100M
RTL8189FTV
TF/ MMC
26 and 13
OTG
Yes
Spi Flash
45 x 60
35
PI 2G-IOT
H5 Cortex 32bit
256 DDR
RDA5991
Yes
TF/ MMC
40
DSI
CSI
Mic and Jack
1 + OTG
Yes
Yes
Yes
2G (4 band) with sim card slot
67 x 42
35
9.9
                                               
                                       

                               

1

threads

8

posts

22

credits

Novice

Rank: 1

credits
22
 Author| Published in 2017-8-28 07:23:07 | Show all floors
                                               
PI PC
H3 Cortex A7
1.6 quad
1GB DDR
100M
Yes
TF/ MMC
40
HDMI
CSI
Mic and Jack
3 + OTG
Yes
Yes
Yes
85 x 55
38
15
PI PC 2
H5 Cortex A53
1.2 quad
1GB DDR
100/1000M
Yes
TF/ MMC
40
HDMI
CSI
Mic and Jack
3 + OTG
Yes
Yes
Yes
NOR Flash 2MB
85 x 55
70
19.98
PI PC Plus
H3 Cortex A7
1.6 quad
512 DDR
100M
Yes
Yes
TF/ MMC
40
HDMI
CSI
Mic and Jack
3 + OTG
Yes
Yes
Yes
8Gb EMMC
85 x 55
70
21.99
PI Plus
H3 Cortex A7
1.6 quad
1GB DDR
100/1000M
RTL8189ETV B/G/N
Yes
TF/ MMC
40
HDMI
CSI
Mic and Jack
4 + OTG
Yes
Yes
Yes
SATA Recovery Key 8GB EMMC
108 x 60
50
PI PC Plus 2E
H3 Cortex A7
1.6 quad
2GB DDR
100/1000M
RTL8189ETV B/G/N
Yes
TF/ MMC
40
HDMI
CSI
Mic and Jack
3 + OTG
Yes
Yes
Yes
16Gb EMMC Recovery Key Upgrade Key
108 x 67
83
35
PI Plus 2
H3 Cortex A7
1.6 quad
2GB DDR
100/1000M
RTL8189ETV B/G/N
Yes
TF/ MMC
40
HDMI
CSI
Mic and Jack
4 + OTG
Yes
Yes
Yes
SATA Recovery Key Upgrade Key 16GB EMMC
108 x 67
83
49
PI Prime
H5 Cortex A53 64bit
2GB DDR
100/1000M
8723BS B/G/N
Yes
Yes
TF/ MMC
40
HDMI
CSI
Mic and Jack
3 + OTG
Yes
Yes
Yes
Reset Upgrade key
98 x 60
68
29.9
Win/ Win Plus
A64 Cortex 64bit
1.2 quad
1/2GB DDR
100/1000M
Ap6212 B/G/N
Yes 4.2
Yes
TF/ MMC
40
LVDS and HDMI
CSI
Mic and Jack
4 + OTG
Yes
Yes
Yes
Yes
Reset PMU 2MB spi
93 x 60
48
25/29.90

1

threads

8

posts

22

credits

Novice

Rank: 1

credits
22
 Author| Published in 2017-8-28 07:24:39 | Show all floors
Edited by sryou812 at 2017-8-28 07:29

                                
A brief explanation These are mini computers powered by a ARM prossesor ram and as a harddrive a TF card. After that the options go on to WiFi Bluetooth G2 and SATA connections almost limitless. The computers run Anadroid or  Linux so it is a good thing to familiarize with the OS I am not talking about programing or the like rather to know what distro you want (most command lines you can find explained to you as you need it). However the real shining quality of these computers is that they have a simular GPIO (not the same setup of pins)  as the raspberry Pi that you can literally do what ever you want from GPS to a touch screen to any sensor in the book (sensor packs come in 37 but that is a far cry from what is out there) and the computer can act accordingly from home automation to robots to NAS the sky is the limit!
Choosing A Pi The options is in the chart above however there are sometimes other factors that are worth mentioning here
        GPIO do you need 26 or 40 more is differently better ( for example a kuman 3.5 inch touchscreen takes 15 pins) but it factors in on size too however the 26 are not pins rather holes and need to be soldered in wires or aheader that you need to buy, the 13 pin header is a output of ports from the cpu.  
       Processor make sure to check that your selected distro runs on it and that it is still current the faster processor like the A64  is what we call cutting edge that it does not have a lot of support yet         WiFi in linux not all chipsets have good drivers (thus making a good chipset bad) like theXR819 be sure to check to see if it can do what you want it to do (monitor mode works on only very selected chipsets)
        Ethernet not all boards have and the smaller ones do not have gigabit ethernet (not very good as NAS) it is worthwhile to check to see if you can get gigabit speeds.
        Screen HDMI is almost standard on all boards however you can connect a screen to the GPIO some have a dedicated port for screen and if using that port make sure you get the screen that matches the port or maybe headless is a better way to go
        Size and weight how much space you have can change a lot also the weight making a device disappear in a light switch or on a desktop caring in you pocket or in a car  
        Others Emmc is a big plus freeing up a TF card slot debug is great when you run into problems a battery is instead of a plug or powerbank

0

threads

3

posts

90

credits

Registered member

Rank: 2

credits
90
Published in 2022-9-21 16:01:28 | Show all floors
It's relevant information for me, thank you!

1

threads

106

posts

633

credits

Senior member

Rank: 4

credits
633
Published in 2022-9-21 16:18:56 | Show all floors
This post was finally edited by RobertChong at 2022-9-23 14:05

It's great that you share such useful information that can be found in the public domain. Any help is important to me, especially the one that concerns the fulfillment of my tasks. I'm preparing a term paper and this is not easy for me https://www.grabmyessay.com/coursework-writing-help And I found a source that helped answer all my questions and prepare properly.
You need to log in before you can reply login | Register

Points Rule

Quick reply Top Return list