Orange Pi Plus 2 not booting

Hitmare

Hello

I have the following problem:

I'm using the Official Orange Pi Plus 2 Raspbian image and get from the Debug TTL Port following message

1. 
   
2. HELLO! BOOT0 is starting!
   
3. boot0 version : 4.0.0
   
4. fel_flag = 0x00000000
   
5. rtc[0] value = 0x00000000
   
6. rtc[1] value = 0x00000000
   
7. rtc[2] value = 0x00000000
   
8. rtc[3] value = 0x00000000
   
9. rtc[4] value = 0x00000000
   
10. rtc[5] value = 0x00000000
    
11. rtc[6] value = 0x00000000
    
12. rtc[7] value = 0x00000000
    
13. DRAM DRIVE INFO: V0.8
    
14. DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
    
15. DRAM CLK = 672 MHz
    
16. DRAM zq value: 003b3bfb
    
17. READ DQS LCDL = 001f1f1f
    
18. DRAM SIZE =2048 M
    
19. odt delay
    
20. dram size =2048
    
21. card boot number = 0
    
22. card no is 0
    
23. sdcard 0 line count 4
    
24. [mmc]: mmc driver ver 2014-12-10 21:20:39
    
25. [mmc]: ***Try SD card 0***
    
26. [mmc]: SD/MMC Card: 4bit, capacity: 1876MB
    
27. [mmc]: vendor: Man 0002544d Snr a49e7ea3
    
28. [mmc]: product: SD02G
    
29. [mmc]: revision: 3.8
    
30. [mmc]: ***SD/MMC 0 init OK!!!***
    
31. sdcard 0 init ok
    
32. The size of uboot is 000dc000.
    
33. sum=ede66ee7
    
34. src_sum=ede66ee7
    
35. Succeed in loading uboot from sdmmc flash.
    
36. Ready to disable icache.
    
37. Jump to secend Boot.
    
38. SUNXI_NORMAL_MODE   
    
39. already secure mode
    
40. 
    
41. [      0.408]
    
42. 
    
43. U-Boot 2011.09-rc1 (Jun 21 2015 - 19:33:17) Allwinner Technology
    
44. 
    
45. [      0.416]version: 1.1.0
    
46. normal mode
    
47. [      0.423]pmbus:   ready
    
48. not set main pmu id
    
49. axp_probe error
    
50. [      0.438]PMU: pll1 1200 Mhz,PLL6=600 Mhz
    
51. AXI=400 Mhz,AHB=200 Mhz, APB1=100 Mhz
    
52. sid read already
    
53. fel key new mode
    
54. run key detect
    
55. no key found
    
56. no key input
    
57. dram_para_set start
    
58. dram_para_set end
    
59. normal mode
    
60. [      0.468]DRAM:  2 GiB
    
61. relocation Offset is: 75af9000
    
62. [box standby] read rtc = 0x0
    
63. [box_start_os] mag be start_type no use
    
64. user_gpio config
    
65. use

Copy code

i also tried differnet images from the Official Orange Pi download page

What can i do to run this Board properly ?

BR

Hitmare

#bump

no one got a clue ?

igorpec

Perhaps try an alternative?
https://www.armbian.com/orange-pi-plus-2/

Hitmare

igorpec replied at 2018-3-21 14:10
Perhaps try an alternative?
https://www.armbian.com/orange-pi-plus-2/

Stucks at

1. U-Boot SPL 2017.11-armbian (Jan 25 2018 - 07:57:48)
   
2. DRAM: 2048 MiB
   
3. Trying to boot from MMC1
   
4. 
   
5. 
   
6. U-Boot 2017.11-armbian (Jan 25 2018 - 07:57:48 +0100) Allwinner Technology
   
7. 
   
8. CPU:   Allwinner H3 (SUN8I 1680)
   
9. Model: Xunlong Orange Pi Plus / Plus 2
   
10. DRAM:  2 GiB
    

Copy code

any clue ?

igorpec

Hardware issue, perhaps memory is not in a good shape. SD card troubles would manifest differently.