View: 12868|Reply: 5

ppp demon is getting crashed in 2G-IoT orange-pi

[Copy link]

3

threads

5

posts

37

credits

Novice

Rank: 1

credits
37
Published in 2017-7-25 14:39:38 | Show all floors |Read mode
Edited by Amit1094 at 2017-7-25 14:42

Hi,

I am working on Orange-PI 2G-IoT and try to bring GSM connection up.
I am able to bring GSM connection up, but it;'s getting crashed[ppp demon] after 1-2 min.

Please find logs attached..

Disconnecting at Tue Jul 25 06:30:27 2017--> The PPP daemon has died: Lack of LCP echo responses (exit code = 15)--> man pppd explains pppd error codes in more detail.-->
I guess that's it for now, exiting--> Provider is overloaded(often the case) or line problem.-->
The PPP daemon has died. (exit code = 15)

Thanks
Amit Sharma

This thread contains more resources

You need to Log in to download or view,No account?    Register

x

0

threads

18

posts

509

credits

Senior member

Rank: 4

credits
509
Published in 2017-7-25 22:27:27 | Show all floors
Edited by Reinhard at 2017-7-26 14:45
  1. root@OrangePi:~# nano /etc/ppp/peers/wvdial [ENTER]
Copy code

Set the # in the last row to disable the lcp-check

  1. # If this option is given, pppd will presume the peer to be dead if n
  2. # LCP echo-requests are sent without receiving a valid LCP echo-reply.
  3. # If this happens, pppd will terminate the connection. Use of this
  4. # option requires a non-zero value for the lcp-echo-interval parameter.
  5. # This option can be used to enable pppd to terminate after the physical
  6. # connection has been broken (e.g., the modem has hung up) in
  7. # situations where no hardware modem control lines are available.

  8. # lcp-echo-failure 4
Copy code



███ Greatings from Germany ███
███             Reinhard              ███
███                                       ███

3

threads

5

posts

37

credits

Novice

Rank: 1

credits
37
 Author| Published in 2017-7-28 15:02:47 | Show all floors
Reinhard replied at 2017-7-25 22:27
Set the # in the last row to disable the lcp-check

Hi Reinhard,

After doing the code changes according to your comment. But Problem still persisting.
is there any other configuration needs to be done the same?

Thanks
Amit Shrama

3

threads

19

posts

87

credits

Registered member

Rank: 2

credits
87
Published in 2017-9-17 23:00:19 | Show all floors
I have the same problem. Did you guys solve the issue?

3

threads

19

posts

87

credits

Registered member

Rank: 2

credits
87
Published in 2017-9-21 18:00:59 from mobile | Show all floors
JRios replied at 2017-9-18 01:32
Maybe not enough current from power supply...Are you just powering with PC USB 2.0 (It is limited to ...

Did it work for you?

0

threads

1

posts

28

credits

Novice

Rank: 1

credits
28
Published in 2018-5-30 18:25:04 | Show all floors
Hi,
I am also trying to connect orangepi-2G board over GPRS. It successfully connected to GPRS but after 2 min it get automatically disconnected.
here is the log.

--> pppd: àkô¶Xq[01]àq[01][01]
--> pppd: àkô¶Xq[01]àq[01][01]
--> Connect time 1207786.0 minutes.
--> pppd: àkô¶Xq[01]àq[01][01]
--> pppd: àkô¶Xq[01]àq[01][01]
--> pppd: àkô¶Xq[01]àq[01][01]
--> Disconnecting at Wed May 30 10:20:10 2018
--> The PPP daemon has died: Lack of LCP echo responses (exit code = 15)
--> man pppd explains pppd error codes in more detail.
--> I guess that's it for now, exiting
--> Provider is overloaded(often the case) or line problem.
--> The PPP daemon has died. (exit code = 15)
root@OrangePi:~#

I also tried with multiple adaptor but result is same.
I check with file /etc/wvdial.conf
I am not finding any thing, why this connection break down.
Regards,
Rahul K.
You need to log in before you can reply login | Register

Points Rule

Quick reply Top Return list