View: 4510|Reply: 2

Power on with powered hub problem?

[Copy link]

6

threads

32

posts

626

credits

Senior member

Rank: 4

credits
626
Published in 2017-4-23 22:06:05 | Show all floors |Read mode
This is on Orange Pi One (Armbian legacy). When I connect a powered hub, power off the OPi and try to power on again by reconnecting the power jack, the OPi does not turn on. It MAY turn on in 1 of the 10 trials thou.

Is this a known issue? Is it HW related?


OPi's: 3 Zero, 4 One, 1 Plus, 1 PC2, 1 cam
OPi on transit: 1 One, 1 2G-IOT, 1 2G IOT Touch LCD
3 RPi 3, 1 RPi 2, 3 RPi cam

3

threads

20

posts

163

credits

Registered member

Rank: 2

credits
163
Published in 2017-12-12 04:23:54 | Show all floors
I haven't had luck getting the Pi One to boot when plugging in a powered USB Hub to the USB port.  I think I have even corrupted a SD card or two attempting it.  I had luck once by plugging the power port and the USB hub power at the same time.  It ran like that for a good 2-3 hours. The next time I attempted it the card got corrupted again.

6

threads

32

posts

626

credits

Senior member

Rank: 4

credits
626
 Author| Published in 2017-12-13 14:07:48 | Show all floors
tlaswell replied at 2017-12-12 04:23
I haven't had luck getting the Pi One to boot when plugging in a powered USB Hub to the USB port.  I ...

I just realized I was vague in my OP...

I was powering the OPi from a regular adapter. But I used an additional external powered hub on the USB side to get more USB ports...

OPi's: 3 Zero, 4 One, 1 Plus, 1 PC2, 1 cam
OPi on transit: 1 One, 1 2G-IOT, 1 2G IOT Touch LCD
3 RPi 3, 1 RPi 2, 3 RPi cam
You need to log in before you can reply login | Register

Points Rule

Quick reply Top Return list