Pi Plus 2e initializing SDRAM Fail

Sartor · Published in 2016-12-16 02:55:26

Edited by Sartor at 2016-12-16 02:56

Hello members, I have recently bought Orange Pi Plus 2e from aliexpress. I have followed all instructions for burning different OS images on different microSD cards. But I can't launch my board. No leds are lighting and no other signs of live. Power adapter is original (5V, 3A)? real voltage is 5.36V. I connected UART adapter and received this dump:

HELLO! BOOT0 is starting!
boot0 version : 4.2.0
boot0 commit : c8c201b51b7ea1baa94590a1887313124d9a5879
fel_flag = 0x00000000
rtc[0] value = 0x00000000
rtc[1] value = 0x00000000
rtc[2] value = 0x00000000
rtc[3] value = 0x00000000
rtc[4] value = 0x00000000
rtc[5] value = 0x00000000
rtc[6] value = 0x00000000
rtc[7] value = 0x00000000
DRAM DRIVE INFO: V1.4
the chip id is 0x00000081
the chip id is 0x00000081
the chip id is 0x00000081
the chip id is 0x00000081
the chip id is 0x00000081
NOT GATE MODE
READ DQS LCDL = 001e1e1e
initializing SDRAM Fail.

Copy code

Can you help me?

igorpec · Published in 2016-12-16 03:12:37

What about from nighty section?

https://www.armbian.com/orange-pi-plus-2e/

Sartor · Published in 2016-12-16 04:50:56

Edited by Sartor at 2016-12-16 04:53

I have burned Armbian (nightly). This is boot dump:

U-Boot SPL 2016.11-armbian (Dec 15 2016 - 11:55:30)
DRAM: 0 MiB
### ERROR ### Please RESET the board ###

Copy code

Sartor · Published in 2016-12-20 04:12:18

No other variants?

igorpec · Published in 2016-12-20 15:18:55

https://www.armbian.com/search_gcse/

Search for: ### ERROR ### Please RESET the board ### for more info and possible workarounds.