orange pi pc does not turn on

evi83 · Published in 2016-10-11 02:41:59

Hello guys
I need help
my orange pi pc does not work
when I insert the jack plug into the current
the only lights that light up are the two of the ethernet cable.
without inserting ethernet cable
green and orange light

the last test I did, I tried Parandroid
Then I turned off the system normally from Android
shut down the system
I left the cable connected to electricity
the day after nothing works

you have any idea?

igorpec · Published in 2016-10-11 15:48:10

Download:
http://www.armbian.com/orange-pi-pc-plus/ or http://www.armbian.com/orange-pi-pc/ (for previous version)
Read the docs:
http://docs.armbian.com/User-Guide_Getting-Started/

evi83 · Published in 2016-10-12 03:50:54

I thank you for your answer
armbian jessie desktop works perfectly
but with other versions of Android or even OpenELEC not work
The OPI PC will not turn on, only the ethernet lights
why?
depends on what ?
before I used debian, ubuntu, fedora ....
now no longer go

evi83 · Published in 2016-10-14 01:40:56

can you help me please

igorpec · Published in 2016-10-14 14:10:06

Edited by igorpec at 2016-10-14 07:12

I already did. Use Armbian - its the only general purpuse supported system. If you want to gamble, you are more or less on your own.
Openelec works fine for me, but I only use it - as a main media player. Check Openelec subforum for support.

oggstar · Published in 2016-10-14 22:31:01

If the burned image is damaged/corrupted or the sd card is to slow, old or damaged then you will experience this. I had a similar experience. I had to completely reformat the sd card and then write the image before it worked.

evi83 · Published in 2016-10-18 02:52:35

I changed to the SD card, it seems that everything works well with OpenELEC.
but with Android not, does not start