OpenELEC build for OPi PC with support for TV/DVB tuners

miduman

Hello
I'm trying to watch TV via a DVB-T USB hauppauge wintvr 900h with your distribution OpenELEC and tvheadend , the linux driver for my stick it's in the library but it does not detect tvheadend .
My question is if only to put the stick and it should detect or to do something else
Thankyou .

lymon

miduman replied at 2016-5-12 05:04
Hello
I'm trying to watch TV via a DVB-T USB hauppauge wintvr 900h with your distribution OpenELEC a ...

what does "dmesg" show after you plugged in the DVBT device ? did the kernel detect it ?

Also there are several versions of this DVBT device according to https://linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-900H

so best is to do a "lsusb" to find out which one you have.
if you have the one with the USB id 2040:b138, you are out of luck as there currently is no working linux driver for it.

if you have the one with USB id 2040:6600 you might get it to work.
You can try to follow the instructions on the linuxtv page to get it working (esp. the firmware part of the instructions)

miduman

Thank you, No messages appear when I plug the dvbt

miduman

Is like if I don't connect anything, later I'll try the lsusb  and comment

Dima

I have the same stick and didn't manage to get it working either.

miduman

The usb id is 2040:6600 which it is already good news,
the kernel can not be detected by issues of power also? , I've read something about the subject

giaur500

Czy będzie jakiś nowszy build? Korzystam z najnowszego jaki był w podpiętym wątku, niestety tuner ite9135 (WandTV) odmawia posłuszeństwa.

Czy ktos potwierdzi, ze na tym buildzie działa?

miduman

OpenELEC (community) Version: devel-20160204180036-r1-g92926ea
OpenELEC git: 92926ea2c6b44b6c7e19b34c3c726599648239ae
OpenELEC:~ # lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 009: ID 046d:c317 Logitech, Inc. Wave Corded Keyboard
Bus 004 Device 008: ID 2040:6600 Hauppauge
Bus 004 Device 007: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 14b2:3c28 Ralink Technology, Corp. Conceptronic C300RU v2 802.11bgn Wireless Adapter [Ralink RT2770]
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
OpenELEC:~ #
That's the lsusb log  directly to opipc from ssh
device 8 is correctly detected but no with the tvheadend

jernej

Why don't you try latest image? I has newest backported DVB drivers (while I might drop them in the future if some problem arise).

giaur500

jernej replied at 2016-5-13 02:49
Why don't you try latest image? I has newest backported DVB drivers (while I might drop them in the  ...

I tried your latest build and:
- no hts.pvr and tvheadend included - so I copied them from Gutek's links. Both working fine
- tested 2 tuners: Geniatech padtv - it works, but very unstable. However, it works unstable even on my desktop Linux, with latest 4.5 kernel. So this looks like some kind of general issue on Linux. It9135 - not working at all. Error message:

1. it913x: probe of 1-001c failed with error -22

Copy code

This is shame... ite9135 works perfectly fine on my desktop pc and on raspberry pi. Currently, I'm using raspberry pi as tvheadend backend and your openelec build on orangepi pc, but it would.be better to have everything running on Orangepi pc (raspberry is way too slow for that)

All other things look to be perfectly fine. But it seems to overheat a little