Openelec Build for OPI PC and 2 now with HW decoding

roblad

on new image the power button can only switch orangepiplus off, no reaction after pusshing it again, it is only for switching off now.

jernej

code for power button is the same for all boards and everyone of you get different results. I have a feeling that kernel updates from 3.4.39 to 3.4.110 broke that functionality. However, if those updates are removed, Kodi doesn't even start now, which is even more strange. Actually, power button usually works, if Kodi is stopped from command line before suspend. But it freezes soon after it's started after resume. I will first fix stuttering and then check why it doesn't work with old kernel and this will hopefully give me the answer about power button too.

jernej

ParadoxX27 replied at 2016-3-12 05:27
Suspend/resume cycle works only once . Repeat obtained only after reconnecting the power.

Is it pos ...

It can be done, but that mean change in u-boot. Currently I want to make power button working reliable first.

peniX

Is there a image that will work with the cheap "RTL2832U + R820T2"
usb dongle ?

cbm80

jernej, I have 3 questions:
1. What is the difference between PC and One versions? Only script.bin or something more?
2. What minimum SD card will work with OpenELEC? Image is 574MB so it seems 2GB is big enough. I just found old and probably slow 2GB micro SD and system doesn't boot using latest 0309 version. At least I don't see anything on 720p TV. Green LED is on. EDIT: I changed script.bin to my own 720p60 and it seems to boot. But it loaded significantly slower, so maybe I haven't waited long enough. What is the default resolution in latest release?
BTW: I prepared also 1080i60 script.bin which is perfect for older TVs which support 720p60 and 1080i via upscaling. I even tested it on my 1080p60 projector and I don't see any difference. So you could consider to use 1080i60 (number in fex - 7) which seems to be the most compatible.
3. Would it be possible to add audio output to HDMI and analog at the same time? Like in Android distros. It would be convenient for projectors users.

jernej

cbm80 replied at 2016-3-12 12:25
jernej, I have 3 questions:
1. What is the difference between PC and One versions? Only script.bin o ...

1. script.bin - DVFS settings and u-boot - one doesn't have CPU voltage regulator.
2. 1080p60 (10) is default. I wouldn't select interleaved version for default, because it looks ugly on monitor. Best possible solution would be to select resolution by EDID, but this is currently too much work.
3. Probably it would. Maybe this is audio hub setting in kernel? Would you like to test it? Currently I'm busy with compiling many different versions to pinpoint problem with stuttering.

cbm80

jernej replied at 2016-3-14 05:10
1. script.bin - DVFS settings and u-boot - one doesn't have CPU voltage regulator.
2. 1080p60 (10) ...

What changes are in u-boot for One? Regular PC version works ok on One but of course at max voltage, because of different voltage regulator.

jernej

cbm80 replied at 2016-3-14 11:39
What changes are in u-boot for One? Regular PC version works ok on One but of course at max voltag ...

As I said, different settings for voltage regulator. In this case, voltage regulator is set to none for One. Anyway, I wouldn't recommend to use PC image for one due to differencies in DVFS settings in script.bin.

Galeots

Hi
my install rutorrent- rtorrent error No connection to rTorrent. Check if it is really running. Check $scgi_port and $scgi_host settings in config.php and scgi_port in rTorrent configuration file.
Possibility integration addon for openelec compiler!?

jernej

I think I found the problem with stuttering. Please, test this OPiPC image and report: https://mega.nz/#!pUY1UDrI!fyE68 ... 07DslupMdqwmiGknOzU