Openelec Build for OPI PC and 2 now with HW decoding

Unusual_Suspect

I have one (noobish ) question: why is Kodi 16 relase candidate integrated in the image of the latest build?
Final version is relased, so...
How to integrate new final version in existing build, if it is possible to explain in few words to the noob like me?

I can confirm that now i can power off the device with Melee f10 deluxe, if that information is of any importance...
Melee is programmed to work with Amlogic M8S+ box, btw...

thx

I forgot to mention: OPI PC is my device

jernej

Unusual_Suspect replied at 2016-2-22 20:09
I have one (noobish ) question: why is Kodi 16 relase candidate integrated in the image of the lat ...

I follow offical OpenELEC repository. So you will get final version probably soon after lands in offical git.

You can go playing by yourself if you build your own image. Basically, you just need to replace version and download link. Ask for detailed info if you want go to this route.

jernej

Is there anyone who would like to help me with debugging suspend issue?

What I find till now:
- suspend works with "systemctl suspend"
- wake up works with power key
- few seconds after wake OPi freezes
- if I remove most of the kernel patches except those which fixes building, OPi wakes as it should and goes directly to suspend again.

Dima

Unfortunately I have little to no experience in OpenELEC (or Linux) dev. So if I there is anything I can do, I'd love to help. Though no actual idea what I can do.

TvNot

I don`t build  image. I get an error:
./scripts/dtc-version.sh: line 17: dtc: command not found
./scripts/dtc-version.sh: line 18: dtc: command not found
*** Your dtc is too old, please upgrade to dtc 1.4 or newer
Makefile:1353: recipe for target 'checkdtc' failed
make[1]: *** [checkdtc] Error 1
make[1]: Leaving directory '/home/nout/OpenELEC-OPi2/OpenELEC-OPi2/build.OpenELEC-H3.arm-7.0-devel/u-boot-2016.03-rc2'
Makefile:12: ошибка выполнения рецепта для цели «image»
make: *** [image] Ошибка 1

Dima

You forgot to install dtc.
sudo apt-get install device-tree-compiler

mirza

Anyone has tried Bluetooth Audio with openelec kodi?

lymon

mirza replied at 2016-2-23 21:10
Anyone has tried Bluetooth Audio with openelec kodi?

yes, I tested t with 2 different USB BT adapters...works fine on my end (OrangePi PC)

pmos69

On OrangePI PC:
- Automatic refresh rate changing is working like a charm.
- Kodi interface resolution and refresh rate settings working.
- USBs working
- Ethernet working
- Wifi(usb) working
- mele F10 remote working (keypad, keyboard and air mouse)
- H265 1080p (cedarx-h265) has very, very low cpu usage:

Mem: 440556K used, 383844K free, 6060K shrd, 40648K buff, 195696K cached
CPU0:  1.4% usr  0.8% sys  0.0% nic 96.8% idle  0.0% io  0.0% irq  0.8% sirq
CPU1:  1.4% usr  0.6% sys  0.0% nic 97.9% idle  0.0% io  0.0% irq  0.0% sirq
CPU2:  2.2% usr  0.6% sys  0.0% nic 96.8% idle  0.0% io  0.0% irq  0.2% sirq
CPU3:  0.6% usr  3.6% sys  1.2% nic 94.2% idle  0.0% io  0.0% irq  0.2% sirq
Load average: 3.23 3.31 2.37 2/114 2207
  PID  PPID USER     STAT   VSZ %VSZ CPU %CPU COMMAND
  594   589 root     S     582m 71.9   2  3.4 /usr/lib/kodi/kodi.bin --standalone -fs --lircdev /run/lirc/lircd

- Video playback has ocasional hickups (hardly noticeable)

- Audio seems sometimes out of sync (by about 250ms) - further checking needed.

jernej

I updated sources and Kodi 16.0 stable is included. I also fixed kswapd/CMA issue so now you should see full memory available to system. I started to work on suspend and LEDs but that is work in progress, so please don't report such bugs.

Whoever will compile: please compile from scratch
Whoever will use images (once they will be available): please flash full sd card image

BTW: Disabled CMA was the reason why waking from suspend failed.