Fix thermal issues

fordham · Published in 2016-1-21 22:46:01

Can I use this script on Openelec?

xlogan · Published in 2016-1-23 09:02:56

Hi

Thanks for this script, i have run it and i think it change the settings well it said:

Successfully repaired broken overvolting/overclocking settings. Reboot necessary for changes to take effect.

Copy code

but i cant get the idle temperature down from 65, i let it idle for some time and this is a screenshot

and then i run

sudo ./cpufreq-ljt-stress-test

Copy code

and this is the screenshot and the output, it seems ok, why it cant get lower than 65 deg?. Is there anything else it needs to be done? Thanks

The cjpeg and djpeg tools from libjpeg-turbo are not found.
Trying to download and compile them.
CPU stress test, which is doing JPEG decoding by libjpeg-turbo
at different cpufreq operating points.
Testing CPU 0
1536 MHz SKIPPED
1440 MHz SKIPPED
1344 MHz SKIPPED
1200 MHz ............................................................ OK
1104 MHz ............................................................ OK
1008 MHz ............................................................ OK
912 MHz ............................................................ OK
816 MHz ............................................................ OK
720 MHz ............................................................ OK
648 MHz ............................................................ OK
600 MHz SKIPPED
504 MHz SKIPPED
480 MHz SKIPPED
408 MHz SKIPPED
312 MHz SKIPPED
240 MHz SKIPPED
120 MHz SKIPPED
60 MHz SKIPPED
Testing CPU 1
1536 MHz SKIPPED
1440 MHz SKIPPED
1344 MHz SKIPPED
1200 MHz ............................................................ OK
1104 MHz ............................................................ OK
1008 MHz ............................................................ OK
912 MHz ............................................................ OK
816 MHz ............................................................ OK
720 MHz ............................................................ OK
648 MHz ............................................................ OK
600 MHz SKIPPED
504 MHz SKIPPED
480 MHz SKIPPED
408 MHz SKIPPED
312 MHz SKIPPED
240 MHz SKIPPED
120 MHz SKIPPED
60 MHz SKIPPED
Testing CPU 2
1536 MHz SKIPPED
1440 MHz SKIPPED
1344 MHz SKIPPED
1200 MHz ............................................................ OK
1104 MHz ............................................................ OK
1008 MHz ............................................................ OK
912 MHz ............................................................ OK
816 MHz ............................................................ OK
720 MHz ............................................................ OK
648 MHz ............................................................ OK
600 MHz SKIPPED
504 MHz SKIPPED
480 MHz SKIPPED
408 MHz SKIPPED
312 MHz SKIPPED
240 MHz SKIPPED
120 MHz SKIPPED
60 MHz SKIPPED
Testing CPU 3
1536 MHz SKIPPED
1440 MHz SKIPPED
1344 MHz SKIPPED
1200 MHz ............................................................ OK
1104 MHz ............................................................ OK
1008 MHz ............................................................ OK
912 MHz ............................................................ OK
816 MHz ............................................................ OK
720 MHz ............................................................ OK
648 MHz ............................................................ OK
600 MHz SKIPPED
504 MHz SKIPPED
480 MHz SKIPPED
408 MHz SKIPPED
312 MHz SKIPPED
240 MHz SKIPPED
120 MHz SKIPPED
60 MHz SKIPPED
Overall result : PASSED

Copy code

-Logan

mrdma · Published in 2016-1-25 03:44:13

I'm trying to run this on Laboris Ubuntu mini (headless). I'm getting "Could not convert script.bin to fex. Exiting". Is this a permissions issue?

script.bin resides in /media/boot

Any ideas?

Thank you.

xlogan · Published in 2016-1-26 07:15:21

mrdma replied at 2016-1-24 20:44
I'm trying to run this on Laboris Ubuntu mini (headless). I'm getting "Could not convert script.bin ...

I siposse that you run this scripts with sudo, right??, may be you could post your scrpt.bin or tell me where to download it but i supose should work with everyone. You can test it manually with this command

bin2fex /boot/script.bin

Copy code

And see what you get.

-Logan

elsid · Published in 2016-1-30 20:28:41

Edited by elsid at 2016-1-30 20:34

xlogan replied at 2016-1-26 07:15
I siposse that you run this scripts with sudo, right??, may be you could post your scrpt.bin or te ...

I have the same problem with Loboris' image and script.bin
Here's my script.bin https://www.dropbox.com/s/e6s2rcolukqwlwx/script.tar.gz?dl=0

WereCatf · Published in 2016-1-30 20:57:47

Do you have sunxi-tools installed, ie. fex2bin and bin2fex?

elsid · Published in 2016-1-31 15:54:05

WereCatf replied at 2016-1-30 20:57
Do you have sunxi-tools installed, ie. fex2bin and bin2fex?

Do you have sunxi-tools installed, ie. fex2bin and bin2fex?

That was the problem. Installed sunxi tools - everything's fine now. Thanks!

mrdma · Published in 2016-2-1 04:35:05

I'm at the end of my rope between this issue and getting a wifi dongle to work. With this issue, and thanks to WereCatf, I learned that I don't have sunxi tools installed. Then I learned I didn't have libusb installed, then I learned I didn't gave g++ installed, now I have a make error while trying to make sunxi tools that I can't figure out. This is unbelievable.

WereCatf · Published in 2016-2-1 09:19:40

There's no sunxi-tools in repos? At least on Ubuntu 15.10 there is, but I ain't familiar with Debian Jessie. If not, then what errors, exactly, are you running into? It shouldn't be that hard to get sunxi-tools compiled and installed and you're probably just missing some header-files, so you should tell us the errors and we can most likely help you get it fixed.

elsid · Published in 2016-2-1 17:50:41

I used Loboris' Ubuntu trusty image and there's no sunxi-tools in it's repo. So apt-get install in script doesn't work and there's no any error for it.
I took sunxi-tools from Sunxi Wiki or something and they worked ok. Script worked successfully and board became cooler but it's still quite warm. It's not big problem due to I use opi in headless mode.