Openelec Build for OPI PC and 2 now with HW decoding

mswiniuch

New image does'nt help for HDMI-CEC on OPI PC PLUS ;( it still does'nt work at all

Poxucis

mswiniuch replied at 2016-10-29 00:37
New image does'nt help for HDMI-CEC on OPI PC PLUS ;( it still does'nt work at all

Well, he didn't say that he fixed something with cec, did he?

jernej

Another issue with PC Plus is that there is no schematic file available. We can only guess that it is mostly the same as PC.

mswiniuch

Poxucis replied at 2016-10-29 02:16
Well, he didn't say that he fixed something with cec, did he?

No hi didn't - I just had hoped. Thanks Jernej for his BIG JOB.

filkint

Hi jernej,
After updating with 20160806 on 20161026 the RTL8188ETV adapter doesn't work.

mswiniuch

Jernej - can you implement pyA20 module for GPIO? I'd like to get working LCD 2x16 on i2c.
Second: service mpd can't start - "mpd: error while loading shared libraries: libogg.so.0: cannot open shared object file: No such file or directory". Is it possible to fix it? And if it is possible to imlement MPC for MPD controling.
My aim is make internet radio controled by buttons with displayed stations on LCD 2x16 (in Python) - used without monitor or TV. If I connect OPI to TV it will be normally running OpenElec. So I need working Python, I2C on GPIO, MPD and MPC.
Thank you

jernej

filkint replied at 2016-11-1 08:42
Hi jernej,
After updating with 20160806 on 20161026 the RTL8188ETV adapter doesn't work.

Please provide full output of lsusb and dmesg after you pluged in 8188EU dongle.

jernej

mswiniuch replied at 2016-11-1 09:48
Jernej - can you implement pyA20 module for GPIO? I'd like to get working LCD 2x16 on i2c.
Second: s ...

I2C and python is working already. One I2C channel is enabled through script.bin. If it doesn't suits you, then I suggest you change it accordingly. Recently I also added gpio program from WiringOP as an addon. Not sure if it helps you. Well, all programs from unofficial repository are not really supported and I don't want to invest time into them. I will cut off the time I invest in OpenELEC project and rather work on mainline U-Boot and kernel.

filkint

jernej replied at 2016-11-1 17:20
Please provide full output of lsusb and dmesg after you pluged in 8188EU dongle.

1. OpenELEC:~ # lsusb
   
2. Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   
3. Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   
4. Bus 006 Device 002: ID 040b:2013 Weltrend Semiconductor
   
5. Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   
6. Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   
7. Bus 004 Device 002: ID 0bda:0179 Realtek Semiconductor Corp. RTL8188ETV Wireless LAN 802.11n Network Adapter
   
8. Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
   
9. Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
   
10. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    
11. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Copy code

jernej

This is only lsub, but anyway I found the issue.  Workaround is to edit script.bin and change

1. wifi_usbc_id          =
   
2. wifi_usbc_type        =

Copy code

to

1. wifi_usbc_id          =2
   
2. wifi_usbc_type        = 1

Copy code

I will put proper fix on github, but I really don't know when I will build next image. You can build it for yourself, though.