Openelec Build for OPI PC and 2 now with HW decoding

jernej · Published in 2016-7-10 01:41:35

Edited by jernej at 2016-7-9 18:42

dishins replied at 2016-7-9 17:15
can anyone please post the last CEC test image? link appears to be broken

Well, it is deleted, because transfer.sh is meant for temporary storage (14 days) and test image is by definition temporary. You can always build your own from source...

dishins · Published in 2016-7-10 01:50:04

how can i build my own from source, i'm a noob can you please point me?

andreq · Published in 2016-7-10 03:33:06

jernej replied at 2016-7-9 16:01
Fixed. The problem is that U-Boot package is using git repo which gets rebased for every rc. I wan ...

Thanks for the fix.

I did have to change Libssh version to 0.7.2 as 0.7.3 isn't available online (at least right now).

Here's my temps fix :
1. Edit /home/ubuntu/OpenELEC-OPi2/packages/network/libssh/package.mk
2. find PKG_VERSION="0.7.3"
3. Change it to 0.7.2

andreq · Published in 2016-7-10 03:34:41

dishins replied at 2016-7-10 01:50
how can i build my own from source, i'm a noob can you please point me?

See my post over here : http://www.orangepi.org/orangepi ... 3&fromuid=11806

roblad · Published in 2016-7-10 04:38:37

melanrz replied at 2016-7-9 23:21
working all and fast,only when turn off tv and on not working,must restart opi

Hi,

Jak chcesz mozesz do mnie wpasc i sam sprawdzic - niedziala na 50PZ570S - zawiesza siena sekunde 2 , czasmi dziala dobrze ale tylko po restarcie i najlepiej na glownym menu, moze jest to wina przestawienia na PL.

Does not work on 50PZ570S the problem is with hang 1-2 s betwen presing putton on remote controll.

dishins · Published in 2016-7-10 07:25:20

andreq replied at 2016-7-10 03:34
See my post over here : http://www.orangepi.org/orangepibbsen/forum.php?mod=redirect&goto=findpost ...

thx for the guide, however i stopped in the following error:

/OpenELEC-OPi2/projects/H3/patches/u-boot/u-boot-02-support-cheap-mmc.patch
can't find file to patch at input line 5
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|diff -Nur a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
|--- a/drivers/mmc/sunxi_mmc.c 2016-02-25 10:30:30.000000000 +0800
|+++ b//drivers/mmc/sunxi_mmc.c 2016-02-25 10:46:07.723851155 +0800
|
--------------------------
File to patch:
Skip this patch? [y] y
Skipping patch.
patch unexpectedly ends in middle of line
1 out of 1 hunk ignored
Makefile:12: recipe for target 'image' failed
make: *** [image] Error 1

Copy code

andreq · Published in 2016-7-10 10:05:48

dishins replied at 2016-7-10 07:25
thx for the guide, however i stopped in the following error:

You may want to read the last 2 page of this thread hehe. I just had the same exact problem and jernej posted the solution.

Hint: Just "git pull" or re-clone the repo (clean setup is always good).

dishins · Published in 2016-7-10 10:08:42

i did that, repo says "already up to date", but that didn't solve the problem unfortunately.

jernej · Published in 2016-7-10 20:17:17

dishins replied at 2016-7-10 03:08
i did that, repo says "already up to date", but that didn't solve the problem unfortunately.

Ok, same story in less than a day, they rebased git again. I will probably soon start to cache source on some page... Please update source with "git pull"

andreq · Published in 2016-7-10 21:17:03

Oh, sorry dishins, I was 100% sure you had the same problem I just did.