Openelec Build for OPI PC and 2 now with HW decoding

Dima · Published in 2016-6-14 14:50:41

I can confirm that it sometimes work. (on an old Samsung C-series tv)
The only "combination" when it worked: the TV was already on and then I started the Orangepi. Then it worked perfectly. If you switch off the TV and turn it back on, it doesn't work anymore. If the orangepi triggers the tv to turn on during boot, it doesn't work.

But a great first step!

hav · Published in 2016-6-14 22:04:06

With the latest image (CEC update) is normal to a temperature of 72 degrees in the opipc ? room temperature is 40 degrees

Dima · Published in 2016-6-14 22:24:34

I think that's quite good with a room temperature of 40°C (wow, seriously?)

hav · Published in 2016-6-14 23:31:45

Unfortunately it is true . I'm in southern Spain .

hav · Published in 2016-6-15 04:30:36

with the latest changes it is possible to remotely control the opipc with vnc ?

roblad · Published in 2016-6-15 05:05:24

Edited by roblad at 2016-6-15 05:07

Hi,

I confirm with opiplus on LGTV 55 CEC works during boot switch on TV and after switching off TV CEC disappearing.
Is it possible to add sleep option in menu , there is only reboot power down without sleep. After reboot system international settings goes to english.
CEC do not power-off TV when shutdown option is chosen.

jernej · Published in 2016-6-16 03:42:43

Here is another attempt at CEC: https://transfer.sh/w5tAr/openel ... r22857-gf5a28ab.tar

Please note that it might be the same, as I currently don't have access to a CEC capable device.

hav · Published in 2016-6-16 05:41:23

Now, CEC work perfect for me.

roblad · Published in 2016-6-16 05:42:17

The same and additionally power-button does not work - not starts , switching international to english in skin, CEC gone when TV is switched off and next on.

jernej · Published in 2016-6-16 06:03:12

This definetly breaks suspend/resume. jodamm already works on different approach to fix TV off/on issue.

Please disregard previous test image.