Openelec Build for OPI PC and 2 now with HW decoding

jernej · Published in 2016-5-20 21:11:30

andrejb replied at 2016-5-20 08:27
since version 28.4 (i think for a month that i did not build any new versions) I am getting this er ...

As Dima said, fresh git clone and don't use sudo. There is no need for it anymore for a long time.

andrejb · Published in 2016-5-21 01:56:43

i did a fresh git clone (same error). and if i do build as user i get:
...
INSTALL fuse (target)
cp: cannot create special file 'build.OpenELEC-H3.arm-7.0-devel/image/system/dev/fuse': Operation not permitted
Makefile:12: recipe for target 'image' failed
make: *** [image] Error 1

PS: I use debian sid

Dima · Published in 2016-5-21 02:01:02

Well, I don't know what's wrong with your installation. It's def. a permission issue and possibly your user has some issues.
I've built over 20 images the last month without any issues like that (with different VM's, including Debian sid)

andrejb · Published in 2016-5-21 02:37:21

i have build them in the past as well, no problems whatsoever. But latest git clones do give me that error.. and i tried several fresh clones.

Ntalton · Published in 2016-5-21 10:42:12

Is anyone else having trouble with DVB-T cards?
I have an IT9135 noname usb, dmesg shows the firmware being donwloaded and the card recognised and then it gives me this

probe of 1-001c failed with error -22

Copy code

without working afterwards of course.
First I tried with the prebuilt image, then I tried the build on this thread, which worked nicely, but is an old build and has no CVBS out. I kinda tried to build an image myself too, trying to mimic the working old build, but I did not solve my problem.
Can someone help me? Thank you

giaur500 · Published in 2016-5-21 16:32:21

ITE9135 is not working. You need to try some other chip

Blondi88 · Published in 2016-5-21 20:49:20

Can anybody tell me, what i habe to do, to geht cec to work? What i must solder?... I cant find a tutorial or so... It would be Fine when my TV startt or change the channels to HDMI when i Start orangepi... And im very interested in how i geht Hyperion to work... Some time ago i tryed this but the gpio ports does nothing... Thanks..

Blondi88 · Published in 2016-5-21 21:41:28

OK... I got my answere about what i must solder for cec... thanks... It it is easy to geht Hyperion to work, i think i will get a answere soon

... Nice day

jernej · Published in 2016-5-22 23:05:12

@giaur500,
Can you disable deinterlacing while watching your DVB stream(s)? If this helps (uglier image, but almost no artifacts), I will first move deinterlace code to a better place (short term solution). My render rework will take a bit longer.

Ntalton · Published in 2016-5-22 23:52:48

giaur500 replied at 2016-5-21 16:32
ITE9135 is not working. You need to try some other chip

Well that's a shame, I got 4 of those ITE9135 cards

Do you know what the problem is, or if it's going to be fixed, maybe in future builds? Gutek's build works fine, but I need CVBS out.