Lubuntu for orange pi has been released.

emachado · Published in 2015-4-16 00:56:50

Tyrannus replied at 2015-4-15 18:44
What do you want to do? I would work at the Boot Sequence only if I am expert.

Ask Aunt Google for ...

I wanted to change 'disp.screen0_output_mode' variable from boot command line. In other distros, I have already found this variable defined in uEnx.txt or boot.cmd file, usually placed in /boot dir.

Couldn't find any grub-related file in /etc or /boot and there is no grub* package installed.

Tyrannus · Published in 2015-4-16 02:25:20

emachado replied at 2015-4-15 17:56
I wanted to change 'disp.screen0_output_mode' variable from boot command line. In other distros, I ...

Perhaps the uEnv.txt is hidden?.
Muy bien
It's your risk:

# create tempfolder
mkdir /temp/mojito
# search for bootpartition
sudo blkid
# possibly change "/dev/mmcblk0p1" to your pfad
mount /dev/mmcblk0p1 /temp/mojito
#edit your lines
nano /tmp/mojito/uEnv.txt
# sync
sync
# reboot OPI and pray

Copy code

hasta pronto Emachado

Mike

emachado · Published in 2015-4-18 01:13:11

Thanks once again Mike, that helped a lot, but it took some time to see that I was aiming at the wrong variable.

After rack my brain a few more times, looking at the script.bin I discovered that the correct variable to change was disp.screen1_output_mode instead of disp.screen0_output_mode (since screen1 points to the HDMI output). Including disp.screen1_output_mode=1280x1024p60 to the bootargs at uEnv.txt that Mike pointed in his previous comment, it finally worked.

john0815 · Published in 2015-7-24 02:06:05

When do you upload lubuntu 0.9.0 to google drive.

magicse · Published in 2015-7-27 13:48:24

john0815 replied at 2015-7-23 20:06
When do you upload lubuntu 0.9.0 to google drive.

http://www.orangepi.org/download ... 891d9e99d807a6.html

john0815 · Published in 2015-7-27 23:59:11

magicse replied at 2015-7-27 13:48
http://www.orangepi.org/downloadresources/orangepi2/orangepi2_5a2367dd80c6891d9e99d807a6.html

Sorrybut
Please take a look to the Gdrive-link: it shows 0.8.0

magicse · Published in 2015-7-29 20:50:17

john0815 replied at 2015-7-27 17:59
Sorrybut
Please take a look to the Gdrive-link: it shows 0.8.0

http://pan.baidu.com/wap/link?uk ... 6177436&third=0

fritz · Published in 2015-8-16 05:09:18

https://drive.google.com/file/d/ ... aNDA5c3M/view?pli=1

magicse · Published in 2015-9-7 01:03:16

zhao_steven replied at 2015-1-29 18:24
google drive is ok. http://www.orangepi.org/downloaded/Lubuntu_For_OrangePi.html

Why Lubuntu 1404 0.9.0 has /boot/vmlinuz-3.1.10-6-ac100 ???
And in usr/src/linux-headers-3.1.10-6-ac100 headers
And .config = Linux/arm 3.1.10-6-ac100 Kernel Configuration
But It's not 3.4.39
Why????
Where get correct fro Lubuntu 1404 0.9.0 .config and Module.symvers or sources?