|
Good day! I have an orange pi 3 2GB emmc pc. i tried to copy OS to emmc, but its failed. is my emmc dead?
lsblk:
- # lsblk
- NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
- mmcblk0boot0 179:8 0 4M 1 disk
- mmcblk0boot1 179:16 0 4M 1 disk
- mmcblk0 179:0 0 7,3G 0 disk
- mmcblk1 179:24 0 14,7G 0 disk
- ├─mmcblk1p1 179:25 0 50M 0 part /boot
- └─mmcblk1p2 179:26 0 14,7G 0 part /
Copy code fdisk:
- # fdisk /dev/mmcblk0
- Welcome to fdisk (util-linux 2.27.1).
- Changes will remain in memory only, until you decide to write them.
- Be careful before using the write command.
- fdisk: cannot open /dev/mmcblk0: Input/output error
Copy code
dmesg:
- [Чт мар 28 08:34:52 2019] sunxi-mmc sdc2: data error, sending stop command
- [Чт мар 28 08:34:52 2019] sunxi-mmc sdc2: reset:host reset and recover finish
- [Чт мар 28 08:34:52 2019] mmcblk0: timed out sending r/w cmd command, card status 0x900
- [Чт мар 28 08:34:52 2019] mmcblk0: not retrying timeout
- [Чт мар 28 08:34:52 2019] end_request: I/O error, dev mmcblk0, sector 0
- [Чт мар 28 08:34:52 2019] quiet_error: 11 callbacks suppressed
- [Чт мар 28 08:34:52 2019] Buffer I/O error on device mmcblk0, logical block 0
- [Чт мар 28 08:34:52 2019] sunxi-mmc sdc2: data error, sending stop command
- [Чт мар 28 08:34:52 2019] sunxi-mmc sdc2: reset:host reset and recover finish
- [Чт мар 28 08:34:52 2019] mmcblk0: timed out sending r/w cmd command, card status 0x900
- [Чт мар 28 08:34:52 2019] mmcblk0: not retrying timeout
- [Чт мар 28 08:34:52 2019] end_request: I/O error, dev mmcblk0, sector 0
- [Чт мар 28 08:34:52 2019] Buffer I/O error on device mmcblk0, logical block 0
Copy code
|
|