Orange PI rk3399

iBuben · Published in 2019-2-25 16:05:07

Hello! I bought Orange PI rk3399 and tr to attach msata ssd drive to pci-e. Now i use the armbian image. So, i can't see my ssd in /dev. It's same on ubuntu image from orangepi.org.

Is anybody know, how to make it work? lspci shows nothing.

igorpec · Published in 2019-2-25 21:38:30

Edited by igorpec at 2019-2-25 14:41

PCI support is currently broken. You can wait, do nothing or contribute.

https://forum.armbian.com/forum/33-rockchip-3399/
"RK3399 board support is WIP, "for testing only" and problems are expected! If you want to use those boards for some real cases, don't."

BTW. Not sure if mSATA can be attached to mPCI port just like that.

iBuben · Published in 2019-2-25 22:36:29

BTW. Not sure if mSATA can be attached to mPCI port just like that.

Why? This feature is in official device specification.

igorpec · Published in 2019-2-26 00:50:25

(m)SATA device is very different as (m)PCI device, but connector is the same ... you have to bring up device in SATA mode or PCI. Both at the same time doesn't work. I think SATA mode is not supported at all but am not 100% sure, but close.

iBuben · Published in 2019-3-4 06:50:46

Ok. What about wiringOP for rk3399 ? I can't find compatible version

iBuben · Published in 2019-3-4 07:15:36

Sorry. Problem is not in wiringOP. There is no hardware info in /proc/cpuinfo.

uname -a
Linux local 4.4.176-rk3399 #2 SMP Mon Feb 25 15:56:25 UTC 2019 aarch64 GNU/Linux

Orange PI rk3399

This thread contains more resources