Is my Orange Pi Plus 2 bricked???

str@ng3r

Hi,
Ive tried plenty of images on my Orange Pi Pluse 2 board. Now its been my 8th image ive tried till now. I wish to ask you guys if my board is bricked.
Im currently using a power supply rated at 5v @ 4amps. Ive got Raspberry Pi, Udoo quad, Wandboard quad, Dragonboard which worked pretty much out of the box with this Power supply. I use 16gb SanDisk class 10 SD cards.
As instructed ive loaded the image onto the sd card. Got rid of all the files on boot drive into a folder then copied uImage_OPI-2 and script.bin.OPI-2_1080p60 and renamed the two to: uImage and script.bin respectively. Ive also tried the same with OPI-PLUS files too.
What happens when I load the SD card is that the Red Led stays on for 3-4 seconds and then off and this happens in a loop.
What might be the problem ???

igorpec

Do you have any other SD card around? Get a serial console and see what's happening.

Have you tried Armbian yet?
http://www.armbian.com/download/

str@ng3r

igorpec replied at 2016-5-29 14:07
Do you have any other SD card around? Get a serial console and see what's happening.

Have you trie ...

Hi igor,
my bad. The power supply was faulty because of which the orange pi used to reboot. Im using a benchtop supply now and everything seems to be working just fine. Ive tried android as well as debian OS and both seem to work well. As per your request with Armbian ive just completed the download, will try it next.

str@ng3r

str@ng3r replied at 2016-5-29 20:05
Hi igor,
my bad. The power supply was faulty because of which the orange pi used to reboot. Im us ...

Hey Guys,

I guess i have crossed my line this time. Initially in this post I had mentioned I was using a USB based Power Supply which wasn't powering the Orange Pi Plus 2.
Now Ive switched to a desktop computer SMPS which is rated at 400W. It worked fine for a couple of days. Yesterday I happend to connected an amplifier demanding 12V supply. I provided the same using the same SMPS maintaining the ground common. While doing so i happend to short the 12V supply, due to which the entire SMPS shut down. After which i powered the SMPS again and checked that my amplifier works just fine but my Orange Pi won't boot at all, no sign of any LEDs flickering at all. What do you suggest has happend in this case ??? I checked the 3.3V regulator on the Orange Pi board which show proper 3.3V output. Also checked the test point for signs of faulty readings but every test point read the right values.

Is there any fuse on this board which may have seemed to blown off which i could replace ???
Is there any way i could get my board back to life ???

Let me know if you need any more additional information.

Regards,
Nelson

rankxone

The thrill of creating a winning hand in mahjong is unmatched. It’s all about timing and strategy.        mahjong wins

rankxone

My personalized letter opener was a huge hit at my office! The sleek design is so professional, and the engraving makes it feel truly special.        engraved letter opener

rankxone

Ceramiche pottery can make even the simplest setting feel luxurious. It's amazing how something so handmade can look so refined.        ceramiche sassuolo

rankxone

The space-saving potential of automated parking is incredible. It's a great way to make the most of limited urban land.        automated parking

rankxone

Siti internet are a great way to promote creativity. Whether it's art, photography, or music, you can share your work with the world.        siti internet parma