BeeZidoo for OPI-PC ...?

igor2053 · Published in 2016-4-10 01:56:06

So far I think, that the system was installed all available image in this forum for androiid and openelec system. My opinion is there is no problem in Android system, but the version KODI. It is necessary to make the latest version Kodija (16 or 16.1), which will have ZD codec (acceleration). Without it or other tips acceleration , none HD resolution does not work correctly.Version 1.0.22 I think that is not significantly better than version 1.0.21(fix shotcut key problem -- the blue key and red key open the same app).

By the way:
IPTV works on Android system in Perfect player significantly better than those old versions of Kodi (14 or 15). But Perfect player has also its disadvantages (eg failure subtitles).

kingfish600 · Published in 2016-4-15 01:38:19

jacer replied at 2016-4-9 21:05
Zidoo X1 1.0.22 has released.
1.0.22 download
And this one below is from PCDUINO4STB, which is the ...

jacer I can't download the PCDUINO4STB image the link is bad.

jacer · Published in 2016-4-15 22:57:32

kingfish600 replied at 2016-4-15 01:38
jacer I can't download the PCDUINO4STB image the link is bad.

Try this link below.
https://s3.amazonaws.com/pcduino/Images/pcduino4/STB/pcDuino4STB_android_H3_4.4_8188-20150608.img

jacer · Published in 2016-4-15 23:00:38

Try to modify this one.
https://s3.amazonaws.com/pcduino ... 4_8188-20150608.img

didacgil9 · Published in 2016-4-16 15:23:30

Edited by didacgil9 at 2016-4-19 02:58

Where and how can I change this sys_config.fex settings file?
I found the entry start_type=0 using DragonFace, but when I changed it from 1 to 0, the board would still not boot automatically. Actually, it would not even pass from the bootlogo part.
I have development background in Linux, Android, etc. So I would love to learn the process of rebuilding the ROM to customize it, as it is something I started for fun during my PhD studies in Computer Science.

Thanks

didacgil9 · Published in 2016-5-1 15:11:06

What would it be needed to run it on the OPi+?

Hiloz · Published in 2016-11-17 14:26:28

Thanks 4 the rom, been using beelink on my OPI PC but it didn't have Bluetooth under settings menu and only 3 USB worked. this rom has all USB working including OTG port. just waiting for my Bluetooth dongle to arrive so can test it. USB hard drive powers up but I think I just need a 3amp or above charger for the PI and it should work, currently using a 2amp. looking to connect a touch screen and GPS unit to it. Only problem in kodi 16.1 the top usb cant be recognised so had to plug into another port.

kevinkre · Published in 2016-12-1 15:57:57

The Beelink kernel is Armbian, right?

Thanks for your help!

Kevin