Orange PI Zero LTS Armbian

Osoro

Hello. Im trying to configure w1-gpio bus on Armbian.
There are default parametrs set:
/sys/bus/w1/devices/w1_bus_master

w1_master_timeout = 10
w1_master_timeout_us = 0

How to change them? Is this possible or require recompilation of w1-gpio module?

hal8000b

Those commands set the output.
To control the gpio pins install this library

1. git clone https://github.com/xpertsavenue/WiringOP-Zero.git

Copy code

If git is not installed:

1. sudo apt install git

Copy code

1. 
   
2. cd WiringOP-Zero
   
3. chmod +x ./build
   
4. sudo ./build

Copy code

To use from terminal as normal user

gpio readall
gpio mode 7 out  (set pin7 as output)
gpio write 7  1   (pin 7 high)
gpio write 7 0  (pin 7 low)

Hope that helps

kingabort

As someone who loves outdoor adventures, I'm thrilled to see that kayaking is becoming more accessible for big guys. Let's keep spreading the word! website link

aali

Neat blog! Is your theme custom made or did you download it from somewhere? A theme like yours with a few simple adjustements would really make my blog shine. Please let me know where you got your theme. Thanks a lot        Bioma Probiotics for weight loss

aali

This is a good subject to talk about. Usually when I find stuff like this I stumble it. This article probably won’t do well with that crowd. I will be sure to submit something else though.        티비위키 최신주소