Moinitor pink screen after installation RaspBian on emmc

kaiser7978 · Published in 2018-5-11 16:44:43

Hi, I have an Orange Pi Plus 2e ... and after installing RaspBian from SD card to emmc memory, after rebooting .. when I turn on I see a pink screen on my monitor. The Orange pi is connected via a hdmi cable to my monitor and as long as I load the OR. from the sd card, the screen is fine ... but the installation on emmc and reboot. I see everything pink ...how can I solve? am I wrong in the installation?
Thanks

igorpec · Published in 2018-5-11 17:28:31

Start rather here:

https://www.armbian.com/orange-pi-plus-2e/

admin · Published in 2018-5-11 18:46:35

kaiser7978 replied at 2018-5-11 16:49
I have a Samsung SyncMaster P2470HD Monitor, it could be a problem of drivers and the monitor is not ...

Did you try to flash image into EMMC again? I am not sure whether you failed to flash image into emmc.

kaiser7978 · Published in 2018-5-11 16:49:55

I have a Samsung SyncMaster P2470HD Monitor, it could be a problem of drivers and the monitor is not detected correctly?

kaiser7978 · Published in 2018-5-12 00:20:04

thanks for your responses..

kaiser7978 · Published in 2018-5-12 00:39:21

admin replied at 2018-5-11 18:46
Did you try to flash image into EMMC again? I am not sure whether you failed to flash image into e ...

This problem happens to me after I have installed the S.O. from the SD card to the EMMC and restarted gives me a pink screen on my monitor ...

admin · Published in 2018-5-14 10:24:03

kaiser7978 replied at 2018-5-12 00:39
This problem happens to me after I have installed the S.O. from the SD card to the EMMC and restar ...

I am so sorry i am not sure whether it is about image or the screen resolution. Would you mind try the ubuntu desktop image to check whether there is output from screen?