View: 8475|Reply: 6

problem in boot android in orange pi one

[Copy link]

1

threads

1

posts

13

credits

Novice

Rank: 1

credits
13
Published in 2016-7-15 03:20:32 | Show all floors |Read mode
Hi every body
I try android image that downloaded from orangepi site.
after with phoneixcard i burn it on memory card and put in my orange pi,when power on,at first red led light on for about 20-30 second.then green led for about 15 second and again red led.
and i never can any output from hdmi on my monitor.
so what is the problem?how can i run android on my orange pi one?  

4

threads

18

posts

64

credits

Registered member

Rank: 2

credits
64
Published in 2016-8-29 23:07:59 | Show all floors
I also need some help, i have Installed Tronsmart Draco H3. This OS work fine. But suddenly don't boot-up and sometime WiFi don't work. Anybody help

62

threads

653

posts

5498

credits

Administrator

Rank: 9Rank: 9Rank: 9

credits
5498
Published in 2016-8-31 17:26:07 | Show all floors
Hi, first your need to confirm that your SD card should be up to class 10, and try to burn the SD card again. And the image should be also accordingly for your board.
If the HDMI has no out put, try to insert it again to try. If still no work, pls use the TTL cable to analyse the reason.

62

threads

653

posts

5498

credits

Administrator

Rank: 9Rank: 9Rank: 9

credits
5498
Published in 2016-8-31 17:27:41 | Show all floors
cadet.techno replied at 2016-8-29 23:07
I also need some help, i have Installed Tronsmart Draco H3. This OS work fine. But suddenly don't b ...

Hi, could you pls change other image like Android or Lubuntu to have a try to find out whether is the hardward reason or software reason?

4

threads

18

posts

64

credits

Registered member

Rank: 2

credits
64
Published in 2016-8-31 19:52:35 | Show all floors
Edited by cadet.techno at 2016-8-31 20:09
admin replied at 2016-8-31 17:27
Hi, could you pls change other image like Android or Lubuntu to have a try to find out whether is  ...

Hi admin,

last week my board just work fine with that tronsmart darco H3, suddenly when i start my pi after whole night off, it freez on boot screen. after trying a while i am unable to boot the pc. so i tryed to install the img again, then preaper the img same like first time but after flashing when run for first time it hang on tronsmart logo with display dimming same about zidoo x1. i've tryed all other android but fail. before zidoo x1 worked but nothing booting now. i had success with one 8gb sd card before but that sd card is not with me now. i've tryed 3 other sd card 16gb, 8gb, 2gb but all same result. now im hopeless and disapointed. im using a vga to hdmi converter cable for my samsung led monitor with vga port so when i try to install Lubuntu my screen show an unsuported display resulation message and goes dark, same about all other linux. the official android show unsuported display resulation message but this tronsmart and zidoo worked fine for me.

is there any way to install linux on it.... please help me.

4

threads

18

posts

64

credits

Registered member

Rank: 2

credits
64
Published in 2016-9-1 06:12:26 | Show all floors
Edited by cadet.techno at 2016-9-1 07:40

At last i see some light in the corner of the sky.

I have flashed the "OrangePI-PC_Ubuntu_Vivid_Mate.img" in sd card
then i  copy"orange_pi_plus.fex" from "scriptbin_kernel.tar.tz" folder.
Now OPI Plus start booting command line in display for me first time.

Now one new problem occuar, booting stuck in command line display after displaying message FAILED--Failed to start Load Kernel Modules.
Please see attached Image for details.....

This thread contains more resources

You need to Log in to download or view,No account?    Register

x

4

threads

18

posts

64

credits

Registered member

Rank: 2

credits
64
Published in 2016-9-1 07:47:06 | Show all floors
cadet.techno replied at 2016-9-1 06:12
At last i see some light in the corner of the sky.

I have flashed the "OrangePI-PC_Ubuntu_Vivid_Ma ...

"OrangePI-PC_Ubuntu_Vivid_Mate.img" contain attached pictur's file
then i  copy"orange_pi_plus.fex" from "scriptbin_kernel.tar.tz" folder.

Now OPI Plus start booting command line in display for me first time.
Anybody sugest me what to do.......

br

This thread contains more resources

You need to Log in to download or view,No account?    Register

x
You need to log in before you can reply login | Register

Points Rule

Quick reply Top Return list