Orange PI 5 Camera MIPI CSI2

stallion · Published in 2023-4-19 07:58:27

Has anyone tried opi5 with any MIPI CSI2 camera?

There are tons of raspi camera with mipi flex output from PCB. On the PCB you have 2x15 pin connector that camera is connected.

You need only flex extender for 2x15 pin or camera with longer 2x15 flex.

has anyone tried ?

regards

Tom

stallion · Published in 2023-4-19 08:04:03

Nothing about camera use in the manual and there are 3 connectors for camera on this board !

kracozebr · Published in 2023-4-20 20:49:48

This post was finally edited by kracozebr at 2023-4-20 20:51

Same question, how to connect camera to orange pi5?

stallion · Published in 2023-4-21 02:01:44

Most raspi cammera use module 2x15 pin on camera and this way is connected to the PCB of camera:

https://www.google.com/search?q= ... bih=587&dpr=1.5

those shor cable cameras should be usable with usage of cable extender:

https://www.arducam.com/product/ ... nvidia-jetson-nano/

Im expecting from Orange correct overlay profiles for at last imx219 that is 8mix sensor

Orange PI 5 Camera MIPI CSI2

This thread contains more resources