Openelec on Orange Pi PC randomly switches screen to inverse mode

cpu66 · Published in 2016-3-17 17:34:49

Openelec on Orange Pi PC randomly switches screen to inverse mode.
Is it known problem? Is it hardware problem or software?

Here is link to image

http://imgur.com/1vwjimN

It happens in both OpenELEC and Android!

Thanks

jernej · Published in 2016-3-18 01:02:46

I experienced that with another board because of too long HDMI cable. Try another one, preferably shorter.

Unoqueva · Published in 2016-3-19 20:19:30

Edited by Unoqueva at 2016-3-19 13:25

I used the OPI PC in two TVs are both Philips brand.
In the oldest of the two TVs, I've never had problems, but on the other from time to time the colors came out wrong, and while this is solved doing nothing.
Now it seems that in the newest TV is showing me colors without problems after disabling the option "pixel plus link" on the TV, do not know why but this option has something to do with the HDMI-CED

cpu66 I see that your TV is philips, go into installation / preferences / pixel plus link and turn it off

cpu66 · Published in 2016-3-22 20:21:47

Thanks I'll try!!

I have a Philips TV!

cpu66 · Published in 2016-3-23 14:45:45

Edited by cpu66 at 2016-3-23 15:08

Unfortunately it does not work ...
turning off and turning on the TV the problem disappears but then begins again

Unoqueva · Published in 2016-3-24 02:27:22

removing and inserting the hdmi cable also solves, too.

When I put the possible solution, I tried several options and finally doing what I set seems to be solved, today I tried again and it seems that the problem continues, ever seems that if that disappears when you change the option, but not always do.
When I wrote the post, my TV did not have any problem during 4 hours of operation.
We'll have to keep looking for a solution.

cpu66 · Published in 2016-3-24 21:22:35

I do not know what else to try ...

I'm trying with another tv without problems ...

Unoqueva · Published in 2016-4-3 20:09:32

Edited by Unoqueva at 2016-4-3 13:23

I've been trying again and again I seem to work well, but I doubt if it's the option that I have changed or if time is running out.
I set the image resolution in 1080p 50hz in kodi and work well, default is 60hz, I have also tried to 24Hz and after a while the colors were not correct.

Edit: I just fail

yundragino · Published in 2016-4-4 17:47:38

hi everyone,
where I can find a SIMPLE guide to install Openelec on Orange Pi Pc?
thank you so much

Unoqueva · Published in 2016-4-5 01:46:55

yundragino replied at 2016-4-4 10:47
hi everyone,
where I can find a SIMPLE guide to install Openelec on Orange Pi Pc?
thank you so much ...

You're asking the wrong place and also see you have not lost much time searching for information.

But still I'll tell you how.

http://www.orangepi.org/Docs/SDcardinstallation.html

http://www.orangepi.org/orangepi ... &extra=page%3D1