Orange Pi 3 Android source incomplete

jonsmirl

I built the Orange Pi 3 Android source. It boots and Android works. But... it is missing all of the Orange Pi 3 specific code. All of the code for Wifi, Bluetooth, and Ethernet is not there. The Allwinner dev board hardware is not the same as the Orange Pi 3.
Can you make a smaller file containing the Orange Pi specific code? Then I can copy that over the top of the full Android download.

Also, networking does work in the pre-built images. The posted source is not the same as what was used to build the pre-built images.

Adalad

I've tried this too and found the same problem. Managed to get Android 7 working with some modifications too (default launcher, bootanim, installed apps) but the lack of drivers makes the board unusable. If we get them I'll try to get newer versions for bootloader, kernel and ASOP.

Adalad

I've been checking for the hardware so we can try to find drivers later:
- Network card: Realteck RTL8211E
- WiFi+BT: AMPAK AP6256 - Broadcom BCM43456

Adalad

Looks like the drivers are there but they are not working somehow. Here's the log attached, I'll try to read it soon.

greg798

Hi All.
Im build android source for orangepi 3. This very nice, but not startup bt, wifi, netcard. It is possible to add it and fix?

androidoneko

Got the same issue, download the source - follow guide from User Manual.
The compiled android does not detect ethernet, bt, wifi.

Judging from the BoardConfig.mk code -- it's allwinner's BSP/SDK code (so it's allwinner's dev-base hardware - not for orangepi 3)

@gazzamatta

hi guys....i have a big problem with android source for Oranepi3,Android7.
I try many different way but everytime i stopped about 33% when compiling Android. Kernel everytime ok but Android no. Always i have Ninja error.
Thank you for any help and idea.

I forget one thing....i use Debian 9 for Compile my personal Android......i follow all manual and i install all packages needed but my compiling stopped always.

greg798

androidoneko replied at 2019-4-5 15:49
Got the same issue, download the source - follow guide from User Manual.
The compiled android does  ...

Ooo
This Android SDK bug for ethernet opi3 and root

1. # lichee/tools/pack/chips/sun50iw6p1/configs/petrel-p1
   
2. 
   
3. [gmac0]
   
4. gmac0_used         = 1
   
5. phy-mode           = "rmii"  # change this to "rgmii"?
   
6. gmac_rxd1          = port:PA00<2><default><3><default>
   
7. gmac_rxd0          = port:PA01<2><default><3><default>
   
8. gmac_crs           = port:PA02<2><default><3><default>
   
9. gmac_rxerr         = port:PA03<2><default><3><default>
   
10. gmac_txd1          = port:PA04<2><default><3><default>
    
11. gmac_txd0          = port:PA05<2><default><3><default>
    
12. gmac_txclk         = port:PA06<2><default><3><default>
    
13. gmac_txen          = port:PA07<2><default><3><default>
    
14. gmac_mdc           = port:PA08<2><default><3><default>
    
15. gmac_mdio          = port:PA09<2><default><3><default>
    
16. gmac-power0        = "vcc-ephy" # change this to "vcc-io"?
    
17. gmac-power1        =      # change this to "axp806_aldo3"?
    
18. gmac-power2        =
    
19. tx-delay           = 0
    
20. rx-delay           = 0

Copy code

and someone fix bug root this sdk?
PS
Fix - Hack boot_package.fex for ethernet up and hack /system/vendor  /system/lib for wifi and bt

@gazzamatta

@greg798: how do you do? Compile Android source from this web site, I try many time but Everytime it stopped for error. I use Debian System for compile it. You can help me?

@gazzamatta

@greg798: how do you do? Compile Android source from this web site, I try many time but Everytime it stopped for error. I use Debian System for compile it. You can help me?