H3Droid - Android image developed specifically to work on Allwinner H3 devices

kotcza · Published in 2017-6-13 13:33:06

Edited by kotcza at 2017-6-13 07:49

remember to run: ./make.boot.scr (or ./boot.scr.make depends on h3resc version) because boot.cmd has to be prepared further (think of them as a source and 'compiled' binary). in 1.2.8+ there will be working menu option to ease that and also additional option to disable gpio button check (but that would also disable easy bootmenu on opi0/1.

DrDexter · Published in 2017-6-17 02:11:18

ihmgsm replied at 2017-6-12 21:13
Hello,
I have problems with H3resc too. On OeangePi Lite there is a power button, but board allways ...

When you create image for OPi Lite select uboot for OPi PC and fex forOPi Lite.

Working for me!

wicttor19 · Published in 2017-6-17 11:00:27

por fazer faça uma imagens para windons

flyingbaloon · Published in 2017-6-18 16:22:22

Hi , I am trying to write the img , I donot have a linux system but I have a raspberry pi with me and i connected a usb sdcard reader to it and located the sdcard as /dev/sdb1 . then I tried to follow the instructions and when I execute 10_init_new_card.sh i get the error cant get size of /dev/sdb1. could someone please guide . thanks

pmpp · Published in 2017-6-18 22:19:21

@flyingbaloon hi , you need to point OUTDEV at the whole card /dev/sdb, not /dev/sdb1 wich is only a smaller part of it.

DrDexter · Published in 2017-6-19 15:10:06

flyingbaloon replied at 2017-6-18 16:22
Hi , I am trying to write the img , I donot have a linux system but I have a raspberry pi with me a ...

Better to use Ubuntu live CD or USB, you can run it on pc without install.
To avoid size error, go to GParted application and delite all partitions on your SD cart.

flyingbaloon · Published in 2017-6-19 17:18:56

pmpp replied at 2017-6-18 22:19
@flyingbaloon hi , you need to point OUTDEV at the whole card /dev/sdb, not /dev/sdb1 wich is onl ...

Hi , thanks that did the trick , I am using it on orange pi pc plus its working fine . I have one problem, I am trying to root the device using kingoroot , it always give me error . can you please guide ..thanks

robi217 · Published in 2017-6-20 01:25:09

flyingbaloon replied at 2017-6-19 17:18
Hi , thanks that did the trick , I am using it on orange pi pc plus its working fine . I have one ...

The Android APK version of KingoRoot doesn't work for H3Droid, but the Windows PC version works fine.
Just download the Windows version of KingoRoot, connect Orange Pi to your computer with a microUSB cable using the OTG port, go to UsbSwitch app and select "Enable device mode" and make sure that you've got USB debugging mode checked in developer settings.
After that, just follow the steps in the KingoRoot PC app

It worked fine for me a few weeks ago with my Orange Pi Zero, and it should work now as well, but I can't test it right now.
Good luck

DrDexter · Published in 2017-6-20 10:53:48

No not working for my Orange pi Lite. Even not switching device mode. I connect cable from micro USB on OPi to my PC, check "Enable device mode" in UsbSwitch app and nothing happents. My PC not recive any new device connected and on OPi allso no any massages.

flyingbaloon · Published in 2017-6-20 12:59:57

robi217 replied at 2017-6-20 01:25
The Android APK version of KingoRoot doesn't work for H3Droid, but the Windows PC version works fi ...

the method is not working in my orange pi pc plus , the device is not getting detected by the pc