OrangePI-2 with ZIDOO X1 image

Swell6 · Published in 2016-1-4 20:00:14

Do you mean the hosts editor?

alexcom · Published in 2016-1-10 04:20:55

OK, I see some messages about success with this image. That's why I'll ask here: had anyone tried this image with HDMI-DVI cable?
I tried to apply same method that works for Linux, to modify script.bin (and script0.bin, don't know why there are 2 of them) and add lines below to [hdmi_para] section.

hdcp_enable = 0
hdmi_cts_compatibility = 1

Didn't work. Please help me!

igor2053 · Published in 2016-1-19 18:26:02

New firmware v1.0.20 for ZIDOO X1 release

nobitakun · Published in 2016-1-21 08:14:53

For a strange reason this is the second rom I try and it does not work on my Orange PI PC. I burn it to the SD throught PhoenixCard 3.1.0 and when I turn it the Orange PI PC on with the card it shows the logo forever. It does not past that and I don't know what's wrong either. Is there any requirement about the SD card? brand, capacity, SDHC, SDXC...because I'm going crazy just now.

janche · Published in 2016-1-21 09:04:28

Edited by janche at 2016-1-21 07:08

If you are using SD card, previously been prepared with PhoenixCard, you need to repartition it again (delete all old partitions, create one new), then full format, then use PhoenixCard to burn image. Did you perform all this steps?

crazykill · Published in 2016-1-21 17:59:53

Yea there is class10 or higher is recommend.And for size just get a card twice as big as the image and you will have some spare space left.

nobitakun · Published in 2016-1-21 18:56:53

Hey! I solved the issue, I tried the Custom Beelink rom posted by littlestone user with a trick and it worked, so when I try this one I'm almost sure is going to work as well. I just put a fan at max velocity towards my OPI PC in dinning room and the system booted up lol.

My Kingston microSD's are class 4, and my Sandisk 16GB is UHS-I 80MB/s (but I use this one to boot up Linux). Anyways, it is working flawlessly with a simple Kingston 2GB, so I will not complain since yesterday was nothing on screen at all

.

Thank you all for your help!

igor2053 · Published in 2016-1-21 19:37:15

Wait .The next week the new firmware will be available for download via OTA online. Maybe will be better.

nobitakun · Published in 2016-1-21 19:48:04

Good!, then I will wait for the next days to get the new release and test it. Thank you for the info!

anita22 · Published in 2016-1-26 02:33:45

What are the advantages of this rom over Beelink's or original one??