BeeZidoo for OPI-PC ...?

littlestone · Published in 2016-4-4 10:26:11

I've been having troubles of getting all three USB work on OPI-PC for the Zidoo rom, but I had luck with Beelink's. So I thought, why don't I use Beelink's kernel with Zidoo's system? The result, is a merged rom I called BeeZidoo.

https://mega.nz/#!Ql5mlbxI!4ZmokNKEujVhND72_JhO2tnDZTEje7Ur84GWwfVvrDQ

Features:

Beelink v205k4 kernel
init.d support
busybox slipstreamed
Zidoo's 1.0.21 system
Dragonware crap removed
auth.zidoo.tv blocked in host file
Most Zidoo's UI and software removed
Zidoo's Kodi 15.2 remains (and works)
Launcher3
1080p default
All USB ports work
Fixed DVFS and THS
HDMI-DVI capable (I think, not tested)
Superceleron's Recovery (not tested)
Remote works (choose Tronfy MX in Logitech Harmony)

Just flash with PheonixCard to a microsd and boot your OPI-PC.

I couldn't get my USB wifi dongle works. Someone please test and let me know how USB wifi dongle work for you. I still could not figure out how to get USB wifi works (worse, every change on sys_config.fex related to USB wifi seems to clash with USB port)

jacer · Published in 2016-4-4 21:34:43

Does gc2035 CSI camera enabled on this mod? Care to make a image for OPI-ONE but USB PORTS same as OPI-PC?

littlestone · Published in 2016-4-4 22:07:49

The sys_config.fex has enabled gc2035 before injecting to the boot0 and u-boot, and the corresponding kernel module is also included, but I have no way to test it.

I will see what I can do with the OPI-ONE. It has a different PLL, I think.

seba1970 · Published in 2016-4-5 15:06:34

STRANGE but pre installed KODI isn't working in my case , but j try spmc kodi fork and it works , there is no cedarX acceleration in video option only amc ,

jacer · Published in 2016-4-5 21:36:33

Edited by jacer at 2016-4-5 21:39

Tried this one and found three issues need be fixed.1. Won`t boot without press power button (I think you used a old Beelink X2 image to make this)
2. gc2035 CSI camera won`t work, no camera detected as it said, the offical release for OPI-PC works.
3. Sometimes screen get a garbled image during booting into desktop then it will become normal.

littlestone · Published in 2016-4-5 23:16:08

I tested a few times with the Zidoo's Kodi (and actually using it) and so if someone else has issue with Zidoo's Kodi, let me know. I will double check what's wrong. As far as I know, Zidoo's Kodi check the device name and the presence of Zidoo UI (the framework is modded by Zidoo), but both remained in my custom ROM and so they should work. I'm using one of my two OPI-PC as media box so it's a big deal for me for the hardware acceleration.

The kernel came from Beelink's, and if gc2035 doesn't work I may try the official release for OPI-PC's kernel.

Kortsen · Published in 2016-4-6 07:02:12

What is the power profile for this? Does it have bronco's fix?

jacer · Published in 2016-4-6 23:39:50

Edited by jacer at 2016-4-6 23:40

Kortsen replied at 2016-4-6 07:02
What is the power profile for this? Does it have bronco's fix?

Littelstone might use the V1 firmware of X2 kernel, which require to push power button to power on. The newest one is here below.
http://freak-tab.de/luis/AllWinn ... 2-Custom_ROM.img.7z
http://freaktab.com/forum/tv-pla ... stom-rom-beelink-x2

littlestone · Published in 2016-4-8 02:19:30

The power profile is of Bronco's. The kernel is not from Superceleron but it was from Beelink's v205k4. The push power button thing is related to a sys_config.fex setting (start_type=0) which I sometimes set.

jacer · Published in 2016-4-9 21:05:32

Edited by jacer at 2016-4-15 23:00

littlestone replied at 2016-4-8 02:19
The power profile is of Bronco's. The kernel is not from Superceleron but it was from Beelink's v205 ...

Zidoo X1 1.0.22 has released.
1.0.22 download
And this one below is from PCDUINO4STB, which is the fastest I tried, but only 2 USB working.
https://s3.amazonaws.com/pcduino/Images/pcduino4/STB/pcDuino4STB_android_H3_4.4_8188-20150608.img