|
Dear orangepi:
I'm sorry I need your help.
When I execute the command "glmark2-es2" to test the gpu in my Orange Pi 4 refer to the User Manual of the Orange Pi 4, the error "Error: eglInitialize() failed with error: 0x3001" occured.
Could you please give me some suggestions or debug solutions? I am inexperienced in the area of the gpu.
Thanks in advance.
■hardware information
1. board: Orange Pi 4(with emmc)
2. sdcard(32G)
3. connect the network port of the board to the network cable
■operation steps
1. Refer to the User Manual of the Orange Pi 4, download the following image and update it into the sdcard
Orangepi4_2.1.2_ubuntu_bionic_desktop_linux4.4.179.img
2. insert the sdcard into the board
3. power on the board
4. loggin the board and execute the following commands after the board boot finish
$ sudo apt-get update
$ sudo apt-get install glmark2-es2
$ glmark2-es2
Error: eglInitialize() failed with error: 0x3001
Error: eglInitialize() failed with error: 0x3001
Error: main: Could not initialize canvas
BR.
|
|