please choosego to mobile | Continue to access the PC version
View: 23617|Reply: 24

Openelec for H3 Devices

[Copy link]

5

threads

354

posts

2736

credits

Moderator

Rank: 7Rank: 7Rank: 7

credits
2736
Published in 2015-12-13 03:02:13 | Show all floors |Read mode
Edited by fritz at 2015-12-20 17:31

Well, works here on my OPI Plus with mainline u-boot.
I had never thought that this Allwinner binary craplib would realy actually work.
But it does.

@jernej good work, looks not bad.
Thanks!

Supported devices:
  1. DEVICE=HYH-TBH3
  2. DEVICE=OPiPlus
  3. DEVICE=OPi2
  4. DEVICE=OPiPC
Copy code


build with:
sudo PROJECT=H3 DEVICE=xxx ARCH=arm make image

PS. I don't provide ready images!
Boards:
orangepi plus, olinuxino A20, cubieboard A10, mele A2000 .....

4

threads

1118

posts

9536

credits

Moderator

Rank: 7Rank: 7Rank: 7

credits
9536
Published in 2015-12-13 05:31:47 | Show all floors
Thanks,

care to share your patch for mainline u-boot?

5

threads

354

posts

2736

credits

Moderator

Rank: 7Rank: 7Rank: 7

credits
2736
 Author| Published in 2015-12-14 18:09:39 | Show all floors
Edited by fritz at 2015-12-16 00:07

Sure.
It will be There

You can try now:
sudo PROJECT=H3 ARCH=arm DEVICE=OPi2 make image
Boards:
orangepi plus, olinuxino A20, cubieboard A10, mele A2000 .....

4

threads

1118

posts

9536

credits

Moderator

Rank: 7Rank: 7Rank: 7

credits
9536
Published in 2015-12-16 08:03:41 | Show all floors
Edited by jernej at 2015-12-16 01:08
fritz replied at 2015-12-14 11:09
Sure.
It will be There

Great, thanks. I will merge it in my branch. It would be great if Orange Pi PC is added, though.

There is no difference in the operation after boot?

5

threads

354

posts

2736

credits

Moderator

Rank: 7Rank: 7Rank: 7

credits
2736
 Author| Published in 2015-12-16 21:24:22 | Show all floors
Edited by fritz at 2015-12-16 14:32

OPiPC is added.
I have only removed "wifi.conf", OPiPC has no wifi.
kernel_config (linux.arm.conf) is the same as OPi2, should work.
maybe if someone can test it, i don't have this device.
for building:
sudo PROJECT=H3 ARCH=arm DEVICE=OPiPC make image

For the supported devices i will update first post, but I don't think that I will maintain it for a long time.

Boards:
orangepi plus, olinuxino A20, cubieboard A10, mele A2000 .....

4

threads

1118

posts

9536

credits

Moderator

Rank: 7Rank: 7Rank: 7

credits
9536
Published in 2015-12-17 05:42:16 | Show all floors
Are you sure that everything works, especially for OPi2? I have some problems with file system. For example, partition resizing failed.

5

threads

354

posts

2736

credits

Moderator

Rank: 7Rank: 7Rank: 7

credits
2736
 Author| Published in 2015-12-17 06:30:02 | Show all floors
Have you cloned or with your changes?
one time i had problems with filesystem but then i have changed scripts/mkimage.
I try to build OPi2 image now and test it on my OPiPlus.
Boards:
orangepi plus, olinuxino A20, cubieboard A10, mele A2000 .....

4

threads

1118

posts

9536

credits

Moderator

Rank: 7Rank: 7Rank: 7

credits
9536
Published in 2015-12-17 06:49:14 | Show all floors
fritz replied at 2015-12-16 23:30
Have you cloned or with your changes?
one time i had problems with filesystem but then i have change ...

I just merged your changes and build from scratch.

5

threads

354

posts

2736

credits

Moderator

Rank: 7Rank: 7Rank: 7

credits
2736
 Author| Published in 2015-12-17 07:04:28 | Show all floors
Have you checked generated image file wiith fdisk -l and tryed to mount it?
Look at this copy/pasta
http://pastebin.com/XhHEccwd
Boards:
orangepi plus, olinuxino A20, cubieboard A10, mele A2000 .....

5

threads

354

posts

2736

credits

Moderator

Rank: 7Rank: 7Rank: 7

credits
2736
 Author| Published in 2015-12-17 07:10:19 | Show all floors
latest generated image for opi2 boots and works on my opiplus.
But I have no network!
Boards:
orangepi plus, olinuxino A20, cubieboard A10, mele A2000 .....
You need to log in before you can reply login | Register

Points Rule

Quick reply Top Return list