OrangePi Zero 2 + adafruit touchscreen input events

busatoa

Hi everybody,
I'm new about orangepi soc,
I bought a OrangePi Zero 2 and I'm trying to interface it to AdaFruit 2.8" Touchscreen Resistive Display
(https://learn.adafruit.com/adafr ... isplay-raspberry-pi),

I solved the first step about the display framebuffer , the interface is ili9341 , this is the command:

modprobe fbtft_device custom name=fb_ili9341 gpios=reset:69,dc:71 speed=65000000 rotate=90 busnum=1 cs=1 bgr=1 txtbuflen=65536


but I can't using the interface for input touch, it's based on stmpe610 so I tried to compile the kernel  to include stmpe-ts module,
but modprobe stmpe-ts not produce any effects (I deployed the udev rules also, SUBSYSTEM=="input", ATTRS{name}=="stmpe-ts", ENV{DEVNAME}=="*event*", SYMLINK+="input/touchscreen").

have you any exeperience about it in order to help me to close this "knowledge loop"?

Note. I installed Ubuntu Bionic Desktop

Thanks,
Alessandro

Howas19911

I spent a lot of time on your site. And I really enjoyed your post. I also share with you the information that With their attention to detail and creative vision wedding planners in st louis can turn any wedding dream into a reality, ensuring a stress-free and unforgettable experience for the couple and their guests.